User's Manual

www.cel-.com
Cel-Fi GO M is optimized for mobile
applications such as trucks, boats, and
RVs. It features the IntelliBoost™ technology
which allows it to automatically adjust to the
fast changing cellular network conditions
as you move. ONLY when the signal is poor,
will the Intelliboost maximizes gain while
boosting thus preventing any potential
degradation of existing cellular service.
Basic Functionality
The Cel-Fi GO M connects to an external Donor Antenna to draw in
a cellular signal from the macro network. The Cel-Fi GO M Smart
Signal Booster nds the appropriate cellular signal, per the product’s
conguration, improves the signal, and amplies it. Improved
service is provided to the user via the Server Antenna.
Note: A Stationary version (“GO X”) of the product is available. Go to
cel-.com for details.
Cel-Fi WAVE Mobile App
The Cel-Fi WAVE app provides a User Interface to Cel-Fi systems.
The app’s dashboard shows the system “Boost” value. A numeric
representation mapped to the amount of Signal Gain the system
is providing. Higher is better, with nine (9) being the highest value.
Cel-Fi WAVE and Cel-Fi GO M
Your Cel-Fi GO M will automatically select the strongest cellular
signal to boost. However, you may manually congure the system
preferences using Cel-Fi WAVE. Connect to Cel-Fi GO M with a
bluetooth enabled mobile device, and manage the boost settings.
NEMA 4 Rating
The Cel-Fi GO M is NEMA 4 rated, and can be used both indoors
and outdoors.
The NEMA 4 rating provides the following advantages:
• A degree of protection against ingress of solid foreign objects
(falling dirt and windblown dust)
• A degree of protection from the ingress of water (rain, sleet,
snow, splashing water, and hose directed water)
• Equipment will be undamaged by the external formation of ice
on the enclosure
qsg_GO-M-Eng_17-0309
ISSUE MEANING ACTION
Continual Blinking
GREEN
Unit is operational,
but not attaching to a
network to boost.
• Make sure both antennas are connected
properly and are appropriate for the
desired frequencies to boost.
• Make sure the selected operator to
relay is available at your location. This
can be checked with the Cel-Fi WAVE
application. If the service is not available,
it cannot be boosted.
Solid RED LED Unit is not
operational.
• Unplug and reinsert power.
• If restart has no effect, contact vendor for
remedy.
Troubleshooting
LED MEANING
Solid GREEN The unit is working properly and boosting properly.
Blinking GREEN Unit is scanning for networks to boost.
Blinking RED The unit is in an error condition. Use the Cel-Fi WAVE app to
check the error code meaning and remedy.
Solid RED The unit has a hardware error and is not booting up normally.
Cel-Fi GO M features an LED on the top face to indicate the
unit’s state:
Note: In mobile usage, it is normal for the Cel-Fi GO M to uctuate between
scanning and boosting. The Cel-Fi GO M automatically adjusts its boost
behavior based on available signal.
User Interface
The following antennas are authorized to be used with Cel-Fi GO M
Smart Signal Booster:
Antenna Kitting
MODEL DESCRIPTION FREQUENCY
A41-V21-100
Mobile Mag Mount 698-960 // 1710-2700 MHz
CERTIFICATION BAND SUPPORT
FCC, Australia 2/4/5/12/13/28
DONOR SERVER
3
MODEL DESCRIPTION FREQUENCY
A41-V21-101
Mobile Mag Mount 698-960 // 1710-2700 MHz
CERTIFICATION BAND SUPPORT
CE 1/3/5/7/8/20
DONOR SERVER
3
MODEL DESCRIPTION FREQUENCY
A41-V30-100
Patch Antenna 698-960 // 1710-2700 MHz
CERTIFICATION BAND SUPPORT
FCC, CE 1/3/5/7/8/20/2/4/5/12/13/28
DONOR SERVER
3
Additional Cel-Fi Antenna options are available at www.cel-.com/antennas
IN THE BOX
IN THE MOBILE KIT
External Magnetic
Mount (Mag Mount)
Antenna
(used as the donor)
Power
Supply
Interior
Patch Server
Antenna
Main Unit
Included in the Mobile Kit (MK) version:
Cel-Fi GO M
Quick Start Guide
Smart Signal Booster
™
Cel-Fi GO M Smart Signal Booster