Quick Start Guide

Congratulations on your new

indoor signal solution.

This Cel-Fi system is designed to provide you with signicant improve-

ments in coverage as well as 3G data rates.

Setting up the system is extremely simple and consist of placing and

plugging in two components; a Window Unit and a Coverage Unit.

By spending just a few minutes using the instructions in this guide, you

can optimize the installation and get the very most from your new Cel-Fi

System. If you have any trouble during setup, please use the trouble

shooting steps included in this guide.

Step 1

Find the spot with the best 3G coverage:

The rst step in setting up your Cel-Fi system

is to nd the spot in your home or oce

that has the best 3G coverage by using your

phone’s display of a 3G or 4G icon. This is typically by a window,

and if you are in a multi-story building, upstairs windows are usu-

ally better than downstairs windows.

Step 2

Plug in the Window Unit:

Take the Window Unit and one power supply out of the box

(both power supplies are the same, so grab either one). Plug the

Window Unit in, and check to make sure that you can see at

least 1 “Bar” on the display in the center of the device. If you do

not see at least 1 bar, try a dierent location.

Need Help?

Visit us at www.celhelp.com

for an installation video and other

helpful information regarding

installation and trouble shooting.

W I N D O W

U N I T

C O V E R A G E

U N I T

In the package you will nd:

• Window Unit

• Coverage Unit

• Two power adapters.

CEL

FIRS 2

Quick Start Guide

W I N D O W

U N I T

PAGE 1
COVERAGE UNIT WINDOW UNIT WINDOW UNIT The first step in setting up your Cel-Fi system 3G is to find the spot in your home or office that has the best 3G coverage by using your phone’s display of a 3G or 4G icon. This is typically by a window, and if you are in a multi-story building, upstairs windows are usually better than downstairs windows.
PAGE 2
Step 3 Step 4 Optimize the Window Unit Placement Place the Coverage Unit The number of bars you can see on the Window Unit make a significant difference in the operation of the Cel-Fi system. Try moving the Window Unit to a couple of different spots to see if you can get better signal; the more bars the better. Move to a location in your home where you need to have improved coverage. Plug the Coverage Unit in and wait until the numeric display stops cycling, this could take several minutes.