User's Manual

ManualsBrandsNextivity ManualsElectronicsCel-Fi Residential System

Before You Begin.

IMPORTANT: Your Cel-Fi Signal Booster is electronic equipment. Both units must be

kept indoors and in a dry, cool, well ventilated area. To use this product, you need:

• A T-Mobile 3G or 4G compatible mobile phone

• An area inside your home that receives at least one bar of 3G or 4G coverage

• Power outlets

Easy to install, Cel-Fi is a true plug-and-play system that doesn’t require the instal-

lation of antennas or cables.

All you need is one place in your home that gets at least one bar of 3G or 4G

coverage. Just a little bit of 3G/4G signal strength and the revolutionary new Cel-

Fi system will bring you blazing fast downloads, smooth video and surng, and

improved voice coverage throughout your home.

Step 1

Find the spot with the best 3G/4G coverage:

The rst step in setting up your Cel-Fi system

is to nd the spot in your home or oce that

has the highest 3G/4G signal level by using

your phone (3G/4G icon must be displayed).

This is typically by a window, and if you are in

a multi-story building, upstairs windows are

usually better than downstairs windows.

Step 2

Plug in the Window Unit:

Take the Window Unit and one power supply out of the box

(both power supplies are identical, so you can use either one).

Plug the Window Unit into an easily accessible outlet. Check

to make sure that you can see at least 1 “Bar” on the display in

the center of the device. If you do not see at least 1 bar, try a

dierent location.

In this package you will nd:

• Window Unit

• Coverage Unit

• Two Power Adapters

WINDOW

UNIT

WINDOW

UNIT

COVERAGE

UNIT

T-mobile® Signal Booster

RS2 Dual Band

If you need additional information on features and services,

visit us at www.t-mobile.com or,

using an alternate phone, call us at 1-800-937-8997

Need Help?

This Cel-Fi Signal Booster is a T-Mobile-owned device. You will be charged up to $500 if

you fail to return the device after termination of your service with T-Mobile, move to a

dwelling that has a shared wall (townhouse, duplex, apartment or condo), or return it in

a damaged condition.

IMPORTANT INFORMATION ON LIMITATION OF 9-1-1 LOCATION SERVICES

If you are in range of this Signal Booster and are using your wireless phone to call

9-1-1, 9-1-1 location services may not be reliable, and emergency personnel may

not be able to accurately locate you. If you need to call 9-1-1, use a landline phone if

one is available. If you need to use your wireless phone, be prepared to give emer-

gency personnel the physical address or other description of your current location.

Not for resale.

Coverage, including T-Mobile’s 4G HSPA+ network, is not available everywhere.

Cel-Fi is a trademark of Nextivity, Inc. T-Mobile and the magenta color are registered

Summary of content (2 pages)

PAGE 1
COVERAGE UNIT WINDOW UNIT WINDOW UNIT Step 1 Step 2 Find the spot with the best 3G/4G coverage: Plug in the Window Unit: The first step in setting up your Cel-Fi system is to find the spot in your home or office that has the highest 3G/4G signal level by using your phone (3G/4G icon must be displayed). This is typically by a window, and if you are in a multi-story building, upstairs windows are usually better than downstairs windows.
PAGE 2
Step 3 Step 4 Optimize the Window Unit Placement: Place the Coverage Unit: The number of bars you can see on the Window Unit make a significant difference in the operation of the Cel-Fi system. Try moving the Window Unit to a couple of different spots to see if you can get a better signal; the more bars the better. Move to a location in your home where you need to have improved coverage. Plug the Coverage Unit into an easily accessible outlet. Wait until the numeric display stops cycling.