User Manual-N930AF You can download our latest manual here: www.nexigo.
Welcome To The NexiGo Family! Thank you for choosing the NexiGo N930AF Webcam! You are now part of an exclusive club: the NexiGo family! It’s our job to make sure you enjoy your membership. If you have any problems please contact us at cs@nexigo.com at any time for further assistance. Alternatively, solutions to common problems can be found in the FAQ section at the end of this manual. This webcam is covered by our generous 1-year manufacturers warranty. Please visit www.nexigo.
1. HD Lens 2. Noise Reduction Microphone 3. Power Indicator 4. Flexible Clip/base 5. Tripod Attachment Video resolution 1920x1080@30fps, 1280x720@30fps, 640x480@30fps Sensor 1/2.7 inch 2.0 Megapixel CMOS image sensor Focus type Auto Focus Field of view H=65 degrees Image focus 11.
Setting Up Your Webcam 1. Place/Position your webcam 2. Connect the webcam to your computer using the USB cable Note: Make sure you are connected to your network before starting the setup. Note: If you can not use the camera within other apps, you will need to enable access. • In Windows: Select Settings>Privacy>Camera, turn on allow apps to access your camera. • On Mac: Select Apple menu>System Preferences>Security & Privacy>Privacy>Camera, and select which apps you want to use the camera.
Alternately, go to the start menu button at the bottom right corner of the screen and left click it. Scroll through the list of programs there until you get to the "C" section, Camera will be listed there. To see an image from the camera in the app, you may need to select the camera from the list of other camera devices. At the top right or left of your screen click the cycle camera icon (the arrow chasing itself one, not the gear) in the app menu, and keep switching until you get to the NexiGo. 3b.
Q1: How do I know if my camera is recognized by the operating system? A: Connect the camera to any USB2.0/3.0 port. It will take a few seconds for the camera to be recognized after it is connected to the laptop. To ensure the camera has installed correctly, check under Control Panel > System and Security > Device Manager. To verify connectivity on Mac, click the Apple Menu (in the top left corner of your screen) and then click About this Mac. Click on System Report from the pop-up window that appears.
There are three primary icon buttons of the Photo Booth: "continuously take four photos", "take a photo" and "video recording". In photo mode the middle button acts as a shutter button, press it to take a photograph. In video capture mode, press it to start recording and press it again to stop recording. For Windows 8/10 System: Search "Camera" in the search bar of the "Start" menu and click the "Camera" application to preview, record a video and test the camera.
On Mac: Go to System Preferences > Sound. Select NexiGo webcam as the default device for sound input and output. In your video/audio calling application, check the audio settings and make sure that the NexiGo webcam is selected for both the speaker and microphone. Then, check the video settings and verify that NexiGo webcam is selected for the camera.
AMCap: Click Options, select Video Device, then click Properties. You can adjust any image parameter you want according to your needs. PotPlayer: Please download PotPlayer software on your computer and add this camera to it. While using this camera to stream video on the PotPlayer click the Settings button, then adjust the Brightness or other image settings. You can then use another type of software to start a video call and the changes will carry over.
Q7: Why does the microphone still not work even though it is being recognized by my Computer? A: This could mean there is a communication issue happening between the camera and your computer. Navigate to Computer Management > Device Manager > Sound, video and game controllers, and click to expand the menu. Locate the HD Webcam USB option, right-click and select "Uninstall device".
For Skype on Mac: Before running Skype, please make sure that all other applications using the webcam are closed. Failure to do so may mean that Skype will not recognize the webcam. It is also highly recommended to update Skype to the latest version as this can affect the connection as well. Once you have started it select Preferences from the Skype menu in the top left corner of your screen (like the photo below).
In the Audio/ Video tab, select the name of your webcam in the Camera drop down menu. For Skype on Windows 10: Step 1. In the Skype for Business main window, click the arrow next to the Options button , and select Tools > Audio Device Settings.
Step 2. Under Audio Device Settings choose the device you want. HD Webcam Step 3. Click the green arrow next to the Speaker icon to hear a sample tone, and drag the slider if you need to adjust the volume. Step 4. To test your microphone volume, speak into it for a few seconds. The volume is optimal when the progress bar reaches the middle of the test area. Drag the slider next to Microphone to adjust the microphone volume.
HD Webcam Click Join with Computer Audio to finish testing and join the meeting. HD Webcam Q9: Why is my video not in 1080p in my video calling application? A: Check the video output settings in your video capture software, these may be set to a lower capture format. There are various constraints on the system that could impede the ability to attain a 1080p video calling session. They center around processing power (i.e. CPU speed) and available network bandwidth.
For manual focus webcams please gently rotate the lens ring until it clear. For autofocus webcams please wave your hand in front of the webcam, it will adjust the focus automatically. Q10: Why is there flickering or banding on the video feed when I use the webcam? A: This might be due to lighting inconsistencies in your room. To resolve this, open the video control panel on your video capture software and change the frequency response rate to either 50Hz or 60Hz, depending on your region.
ON OFF 1. Remove 3m tape on the back of the privacy cover. 2. Attach the cover to the webcam lens and press firmly. 3. Open/close the cover when use/not use. Q14: Why the microphone volume is too low? A: Make sure that the NexiGo webcam is connected correctly to your computer. Make sure that the NexiGo webcam is positioned correctly. For Windows 10: Step 1. Go to Settings> System> Sound. Step 2. In Input, ensure your microphone is selected under Choose your input device, then select Device Properties.
Step 3. On the Levels tab of the Microphone Properties window, adjust the Microphone and Microphone Boost sliders as needed, then select OK. Step 4. Speak into your microphone and check under Test your microphone to make sure your settings work. Q15: How to turn off the function of auto focus? A: For Windows Step 1. Go to Camera app. Step 2. Go to Settings, turn on the "Pro mode" switch. Step 3. On left side there are two options. One for brightness, one for focus. Step 4.