Installation & Assembly

INSTALLATION INSTRUCTIONS

KITCHEN BRIDGE FAUCET

WITH SIDE SPRAY

Model No's: 9451-1

Congratulations on the purchase

of this Newport Brass product,

an excellent choice, that will give you

years of quality service and enhance

the look and style of your home.

PAGE 1
INSTALLATION INSTRUCTIONS KITCHEN BRIDGE FAUCET WITH SIDE SPRAY Model No's: 9451-1 Congratulations on the purchase of this Newport Brass product, an excellent choice, that will give you years of quality service and enhance the look and style of your home.
PAGE 2
Recommended Installation by a Professional Plumbing Contractor Note: The use of petroleum base plumbers putty on our products will nullify the warranty. We recommend the use of clear silicone sealing materials. Use plumbers tape or equivalent to seal all threaded joints. If mounting faucet to a stainless steel rim, an under-mounting support, (e.g. wood, appropriate size x 1/2” thick), should be utilized. Recommended deck hole Ø1.25.
PAGE 3
Stem extention Stem connection Bridge faucet assembly Align hex-sides Detail B (No gap between) Detail A NO GAP Shank 8” - 9-11/16” Clip groove 4-3/4” min.
PAGE 4
Adjust Handle Alignment: 1. In Figure 5, ensure cartridges in full closed position and check HANDLE alignment. If the HANDLE is not correctly aligned, temporary remove the HANDLE, loosen up (but do not completely remove) the ADAPTER SCREW and rotate CARTRIDGE ADAPTER one tooth clockwise (18 degrees), reassemble the HANDLE and recheck alignment. Repeat until the HANDLE is aligned. 2. Remove the HANDLE and tighten the ADAPTER SCREW to firmly secure the CARTRIDGE ADAPTER to cartridge.