Specification Sheet

Open Towel / Tissue Holder

Installation Instructions

Model No. 75-27, 76-27, 77-27, 78-27

Recommended Installation by a Professional Contractor

1. Drill hole in wall at desired location using the appropriate drill size:

· Wood Screw (#6 x 2”) - use: 3/32" Drill

· Toggle Screw (6-32 x 3”) - use: 3/8" Drill

2. Fasten BASE (1) to wall using either WOOD/TOGGLE SCREWS (2). (See Fig. 1)

3.Temporarily place POST (4) onto BASE (1) to check alignment. If necessary, loosen lower screw on

BASE (1) and adjust. Retighten screw.

4. Place ESCUTCHEON (3) over BASE (1). Place POST (4) over ESCUTCHEON (3). Secure into place

by tightening the SETSCREW (5). (See Fig. 2)

Fig. 1

Fig. 2

PAGE 1
Open Towel / Tissue Holder Installation Instructions Model No. 75-27, 76-27, 77-27, 78-27 Recommended Installation by a Professional Contractor 1. Drill hole in wall at desired location using the appropriate drill size: · Wood Screw (#6 x 2”) - use: 3/32" Drill · Toggle Screw (6-32 x 3”) - use: 3/8" Drill 2. Fasten BASE (1) to wall using either WOOD/TOGGLE SCREWS (2). (See Fig. 1) 3.Temporarily place POST (4) onto BASE (1) to check alignment. If necessary, loosen lower screw on BASE (1) and adjust.
PAGE 2
Limited Warranty Brasstech, Inc. (“Brasstech”) warrants to the original consumer residential purchaser (“Original Purchaser”) that if a Brasstech product (“Product”) is confirmed upon inspection to be defective in materials or workmanship during the warranty periods described below, Brasstech will, at its option, either repair or replace the Product with a similar current model of the Product.