Installation Sheet

Open Towel / Tissue Holder

Installation Instructions

Model No. 75-27

Recommended Installation by a Professional Contractor

1. Drill hole in wall at desired location using the appropriate drill size:

· Wood Screw (#6 x 2”) - use: 3/32" Drill

· Toggle Screw (6-32 x 3”) - use: 3/8" Drill

2. Fasten BASE (1) to wall using either WOOD/TOGGLE SCREWS (2). (See Fig. 1)

3. Place POST (3) into BASE (1) at the appropriate height specified and secure into place with set

SCREW(4). (See fig.2)

4. Place ESCUTCHEON (3) over BASE (1). Place POST (4) over ESCUTCHEON (3). Secure into place

by tightening the SETSCREW (5). (See Fig. 2)

Fig. 3

Fig. 1

Fig. 2

2”

PAGE 1
Open Towel / Tissue Holder Installation Instructions Model No. 75-27 Recommended Installation by a Professional Contractor 1. Drill hole in wall at desired location using the appropriate drill size: · Wood Screw (#6 x 2”) - use: 3/32" Drill · Toggle Screw (6-32 x 3”) - use: 3/8" Drill 2. Fasten BASE (1) to wall using either WOOD/TOGGLE SCREWS (2). (See Fig. 1) 3. Place POST (3) into BASE (1) at the appropriate height specified and secure into place with set SCREW(4). (See fig.2) 4.
PAGE 2
Newport Brass Product Care Newport Brass faucets and bath fittings are made of solid brass and are of the finest quality. To maintain the finish on these items, please: • Do not use any abrasive cleaners, detergents, brass or silver polish which will scratch the surface. • Clean with a soft damp cloth. Applying a coating of a non-abrasive liquid wax to the clean surface of the product will keep it looking beautiful. Brass ProTech, a product of Brasstech, Inc.