Installation & Assembly

INSTALLATION INSTRUCTIONS

KITCHEN FAUCET WITH

PULLDOWN SPRAY

Model No's: 3200-5113,

3200-5223

Congratulations on the purchase

of your Newport Brass product,

an excellent choice, that will give you

years of quality service and enhance

the look and style of your home.

3200-5223

3200-5113

PAGE 1
INSTALLATION INSTRUCTIONS KITCHEN FAUCET WITH PULLDOWN SPRAY Model No's: 3200-5113, 3200-5223 3200-5113 3200-5223 Congratulations on the purchase of your Newport Brass product, an excellent choice, that will give you years of quality service and enhance the look and style of your home.
PAGE 2
Recommended Installation by a Professional Plumbing Contractor Note: The use of petroleum base plumbers putty on our products will nullify the warranty. We recommend the use of clear silicone sealing materials. If mounting faucet to stainless steel rim, an under-mount support, (e.g. wood, appropriate size x 1/2” thick), should be utilized. 1. Drill hole in mounting surface. Recommended deck hole Ø1.350” not to exceed Ø1.562”. 4 2. Insert Hoses through base O-RING (1) in hole mounting surface.
PAGE 3
7. With faucet in the OFF position, open water supply valves. Inspect connections under sink for leaks. DO NOT turn faucet on yet. 8. Pull SPRAYHEAD (5) out from SPOUT (4). While holding HOSE (6), detach SPRAYHEAD (5). Aiming HOSE (6) into sink, turn on faucet to center position (mixed) and flush for one minute to remove debris from lines. 4 9. Turn OFF faucet and reattach SPRAYHEAD(5) to HOSE(6). See Figure 5. 6 10. Check the SPRAYHEAD(5) by operating the trigger from aerator to spray.