INSTALLATION INSTRUCTIONS Shown with 934 faucet and shut off valves 3-192, sold separately FLOOR RISER KIT Model No: 3-196 Used with 934 (not included) 1
Product Size Specification Diagram Escutcheons included with 934 are not required for this installation scenerio The use of additional riser support bracing (not included) at a location above floor level is recommended.
Recommended Installation by a Professional Plumbing Contractor Note: Many installation variations are available. One potential scenario is outlined below. Adhere to industry standards & local regulations when installing this product. The use of petroleum base plumbers putty on our products will nullify the warranty. We recommend the use of clear silicone sealing materials. Fig. 1: For riser inlet NIPPLE (1)-(3/4” NPT, not included), deck hole diameters of 7/8” are recommended.
