Installation Guide

ManualsBrandsNewport Brass ManualsTub Filler FaucetsNewport Brass Astaire Triple Handle Deck Mounted Roman Tub Filler with Handshower and Metal Lever Handles

ROMAN TUB 3 VALVE AND TRIM

INSTALLATION INSTRUCTIONS

Valve Body No. 1-507

Trim Kit for Model No’s: 1077, 1087, 1107, 1097, 1067, 1057, 1027, 967, 957, 907,

897, 887, 877, 1607, 1627, 1647, 1667, 1747

Congratulations on the purchase

of this Newport Brass product,

an excellent choice, that will give you

years of quality service and enhance

the look and style of your home.

Summary of content (4 pages)

PAGE 1
ROMAN TUB 3 VALVE AND TRIM INSTALLATION INSTRUCTIONS Valve Body No. 1-507 Trim Kit for Model No’s: 1077, 1087, 1107, 1097, 1067, 1057, 1027, 967, 957, 907, 897, 887, 877, 1607, 1627, 1647, 1667, 1747 Congratulations on the purchase of this Newport Brass product, an excellent choice, that will give you years of quality service and enhance the look and style of your home.
PAGE 2
Rough in valve Installation Recommended Installation by a Professional Plumbing Contractor Note: Use Teflon tape or equivalent to seal all threaded joints. Warning:To prevent severe damage to valve body, any solder/braze process must be performed a min. of 4" from ports. 1. Install the quick connect spout shank through center hole of mounting surface. Secure with washer nut. See Fig. 1 2. Place washer nut on valve body. Insert body, (blue cold & red hot), through hole from below mounting surface. See Fig.
PAGE 3
STEM LENGTH 2-3/8" 2-7/16" 2-1/4" 2-1/4" 2-3/8" 2-1/4" 2-7/16" 2-5/8" 2-1/2" 2-5/8" 2-5/8" 2-1/2" 1-7/8" 2 1/4" 2 1/4" 2 1/16" 2 1/16" 2 3/16" SERIES 877 887 897 907 957 967 1027 1057(F) 1067(F) 1077 1087 1097 1107 1607 1627 1647 1667 1747 Table 1 Trim Installation Note:To achieve desired handle rotational alignment, the cartridge MUST be tightened in a clockwise rotation only. (Cartridge Bonnet factory torque is 14-16 ft-lbs.) 1. Attach handle and diverter trim to valves.
PAGE 4
Newport Brass Product Care Newport Brass faucets and bath fittings are made of solid brass and are of the finest quality. To maintain the finish on these items, please: • Do not use any abrasive cleaners, detergents, brass or silver polish which will scratch the surface. • Clean with a soft damp cloth. Applying a coating of a non-abrasive liquid wax to the clean surface of the product will keep it looking beautiful. Brass ProTech, a product of Brasstech, Inc.