Installation Guide

ManualsBrandsNewport Brass ManualsTub Filler FaucetsNewport Brass East Square Triple Handle Deck Mounted Roman Tub Filler with Handshower and Metal Cross Handles

ROMAN TUB 3 VALVE AND TRIM

INSTALLATION INSTRUCTIONS

Valve Body No. 1-503

Trim Kit for Model No's: 807, 817, 827, 837, 843, 847, 857, 917,

927, 937, 987, 997, 997L, 1007, 1207, 1037, 1407, 1407L, 1507,

2017, 2027, 2107

Congratulations on the purchase

of this Newport Brass product,

an excellent choice, that will give you

years of quality service and enhance

the look and style of your home.

Summary of content (4 pages)

PAGE 1
ROMAN TUB 3 VALVE AND TRIM INSTALLATION INSTRUCTIONS Valve Body No. 1-503 Trim Kit for Model No's: 807, 817, 827, 837, 843, 847, 857, 917, 927, 937, 987, 997, 997L, 1007, 1207, 1037, 1407, 1407L, 1507, 2017, 2027, 2107 Congratulations on the purchase of this Newport Brass product, an excellent choice, that will give you years of quality service and enhance the look and style of your home.
PAGE 2
Rough in valve Installation Recommended Installation by a Professional Plumbing Contractor Note: Use Teflon tape or equivalent to seal all threaded joints. Warning:To prevent severe damage to valve body, any solder/braze process must be performed a min. of 4" from ports. 1. Install the quick connect spout shank through center hole of mounting surface. Secure with washer nut. See Fig. 1 2. Place washer nut on valve body. Insert body, (blue cold & red hot), through hole from below mounting surface. See Fig.
PAGE 3
807 817 827 837 843 847 857 917 927 937 987 997(L) 1407(L) 1007 1207 1037 1507 2017 2027 2107 2-1/2" 2-3/4" 2-1/4" 2-1/4" 2-3/4" 2-1/2" 2-3/8" 2-3/4" 2-1/4” 2-1/4" 2 7/16” 2" 2" 2-1/4" 2-1/4" 2-1/4” 2-1/8" 2-7/16" 2-1/2" 2-1/4" Table 1 SERIES STEM LENGTH Trim Installation Note:To achieve desired handle rotational alignment, the cartridge MUST be tightened in a clockwise rotation only. (Cartridge Bonnet factory torque is 14-16 ft-lbs.) 1.
PAGE 4
Newport Brass Product Care Newport Brass faucets and bath fittings are made of solid brass and are of the finest quality. To maintain the finish on these items, please: • Do not use any abrasive cleaners, detergents, brass or silver polish which will scratch the surface. • Clean with a soft damp cloth. Applying a coating of a non-abrasive liquid wax to the clean surface of the product will keep it looking beautiful. Brass ProTech, a product of Brasstech, Inc.