Installation Guide

ManualsBrandsNewport Brass ManualsTub Filler FaucetsNewport Brass East Square Double Handle Deck Mounted Roman Tub Filler with Metal Cross Handles

Congratulations on the purchase

of this Newport Brass product,

an excellent choice that will give you

years of quality service and enhance

the look and style of your home.

ROMAN TUB 2 VALVE AND TRIM

INSTALLATION INSTRUCTIONS

Valve Model No's: 1-502

Trim Kit for Model No's: 806, 816, 826, 836, 842, 846,

856, 916, 926, 936, 986, 996, 996L, 1006, 1206, 1036,

1406, 1406L, 1506, 2016, 2026, 2106

Summary of content (4 pages)

PAGE 1
ROMAN TUB 2 VALVE AND TRIM INSTALLATION INSTRUCTIONS Valve Model No's: 1-502 Trim Kit for Model No's: 806, 816, 826, 836, 842, 846, 856, 916, 926, 936, 986, 996, 996L, 1006, 1206, 1036, 1406, 1406L, 1506, 2016, 2026, 2106 Congratulations on the purchase of this Newport Brass product, an excellent choice that will give you years of quality service and enhance the look and style of your home.
PAGE 2
Rough in valve Installation Recommended Installation by a Professional Plumbing Contractor Note: Use Teflon tape or equivalent to seal all threaded joints. Warning:To prevent severe damage to valve body, any solder/braze process must be performed a min. of 4" from ports. 1. Install the quick connect spout shank through center hole of mounting surface. Secure with washer nut. See Fig. 1 2. Place washer nut on valve body. Insert body, (blue cold & red hot), through hole from below mounting surface. See Fig.
PAGE 3
826 836 842 846 856 916 926 936 986 996(L) 1006 1036 1206 1406(L) 1506 2016 2026 2 1/4" 2 1/4" 2 3/4" 2 1/2" 2 9/16" 2 3/4" 2 1/4” 2 1/4" 2 1/2” 2" 2 1/4" 2 1/4" 2 1/4” 2” 2 1/8” 2 7/16" 2 9/16" STEM LENGTH 2106 816 2 3/4" SERIES 2 1/4" 806 2 1/2" TABLE 1 Trim Installation Note:To achieve desired handle rotational alignment, the cartridge MUST be tightened in a clockwise rotation only. (Cartridge Bonnet factory torque is 14-16 ft-lbs.) 4. Attach handle trim to valve.
PAGE 4
Newport Brass Product Care Newport Brass faucets and bath fittings are made of solid brass and are of the finest quality. To maintain the finish on these items, please: - Do not use any abrasive cleaners, detergents, brass or silver polish which will scratch the surface. - Clean with a soft damp cloth. Applying a coating of a non-abrasive liquid wax to the clean surface of the product will keep it looking beautiful. Brass ProTech, a product of Brasstech, Inc.