INSTALLATION INSTRUCTIONS ELECTRICAL AIR SWITCH MODEL No's: 2470-5811, 1500-5811
General This control system provides safe and convenient remote on/off switching of one 120V load. Contents: Controller, Air transmitter and air hose. Operation The control system works on a sealed air displacement principle. As the air transmitter button is depressed and released, sealed air is displaced and transmitted through the interconnecting air hose to the pressure sensitive electrical switch, completing the electrical circuit and turning the disposer on.
Select transmitter location (Max. 6 ft. from controller) Dedicated, grounded 120 VAC outlet, continuously energized Controller Air hose Mounting nut Transmitter Rubber washer Warning: To avoid risk of injury - Use indoors in dry locations only. Do not exceed specified electrical ratings. Do not crimp or damage the interconnecting air hose. No user serviceable components inside of controller. Opening controller will void manufacturer’s warranty (949) 417-5207 NWP-2470-5811 Santa Ana, Ca. 92705 www.