Specification Sheet

page 1 of 2 spec_

NEWPORT BATH

280A

Handshower Set

Features

• Solid brass construction

• Traditional styling

• Single function spray

• Finished spray surface

• Handshower incorporates twin back-check valves

• 1/2" NPT inlet elbow fitting

• 2" (5.1 cm) showerhead diameter

Codes / Standards Compliance

Meets or exceeds the following at date of manufacture:

• ASME A112.18.1/CSA B125.1

• IAPMO/cUPC

• IPC

• Energy Policy Act of 1992

• All applicable US Federal and State material regulations

Product Specication:

The Handshower Set shall be of solid brass construction. Handshower Set shall have a single function spray pattern incorporating a finished

spray surface. Handshower Set shall incorporate twin back-check valves within the handshower handle. Handshower Set shall have a 1/2"

NPT inlet elbow fitting and 2" (5.1 cm) showerhead diameter while operating at 2.0 gallons (7.6 liters) per minute maximum flow rate.

Handshower Set shall be Newport Brass Model 280A/___.

Add "Color / Finish" sufx to Model number, below.

Colors / Finishes

15:

15A:

26:

10B:

Polished Nickel

Antique Nickel

Polished Chrome

Oil Rubbed Bronze

• Other: Refer to the Newport Brass catalog for

additional color/nish options.

t: 949.417.5207 | www.newportbrass.com

Specied Model

Model Description Colors / Finishes

280A Handshower Set

15A

26 10B Other

PAGE 1
NEWPORT BATH Handshower Set Features 280A • Solid brass construction • Traditional styling • Single function spray • Finished spray surface • Handshower incorporates twin back-check valves • 1/2" NPT inlet elbow fitting • 2" (5.1 cm) showerhead diameter Codes / Standards Compliance Meets or exceeds the following at date of manufacture: • ASME A112.18.1/CSA B125.
PAGE 2
80A Product Dimensions (units are in inches) Newport Bath Handshower Set 280A page 2 of 2 spec_ 280A t: 949.417.5207 | www.newportbrass.com ©2011 Brasstech, Inc.