Installation Sheet

Towel Ring
Installation Instructions
Model No.
15-09
Recommended Installation by a Professional Contractor
1. Drill holes in wall at points marked using the appropriate drill size:
· Wood Screw (#6 x 2”) - use: 3/32" Drill
· Toggle Screw (6-32 x 3”) - use: 3/8" Drill
2. Loosen SETSCREW (4) in FLANGE (1) and remove POST (3). Fasten FLANGE (1) to
wall using either WOOD/TOGGLE SCREWS (2). (See Fig. 1) Align FLANGE (1) so that
upper flat is level.
3. Thread POST (3) onto FLANGE (1) Position POST (3) height to 2 5/16” from mounting
surface. Secure POST (3) into place by tightening SETSCREW (4). (See Fig. 1)
4. Thread ESCUTCHEON (5) onto FLANGE POST (3). (See Fig. 2)
5. Towel Ring: Slide END POST (6) onto FLANGE POST (3) and secure into place
with SETSCREW (4). (See Fig. 3)
Fig. 1
Fig. 3
6
4
2
Fig. 2
1
3
5
3
2 5/16”
3
4
2001 CARNEGIE AVE, SANTA ANA CA 92705
[phone]
WWW.NEWPORTBRASS.COM
AMS-15-09
05/06/2014