Installation & Assembly

INSTALLATION INSTRUCTIONS

KITCHEN BRIDGE FAUCET

WITH SIDE SPRAY

Model No's: 1400-5412, 1400-5413,

1500-5412, 1500-5413

Congratulations on the purchase

of this Newport Brass product,

an excellent choice, that will give you

years of quality service and enhance

the look and style of your home.

1400-5412

1400-5413

1500-5412

1500-5413

PAGE 1
INSTALLATION INSTRUCTIONS KITCHEN BRIDGE FAUCET WITH SIDE SPRAY Model No's: 1400-5412, 1400-5413, 1500-5412, 1500-5413 1400-5412 1400-5413 1500-5412 1500-5413 Congratulations on the purchase of this Newport Brass product, an excellent choice, that will give you years of quality service and enhance the look and style of your home.
PAGE 2
Recommended Installation by a Professional Plumbing Contractor Note: The use of petroleum base plumbers putty on our products will nullify the warranty. We recommend the use of clear silicone sealing materials. Use Plumbers tape or equivalent to seal all threaded joints. If mounting faucet to stainless steel rim, an under-mount support, (e.g. wood, appropriate size x 1/2” thick), should be utilized. Recommended deck hole Ø1.25.
PAGE 3
Stem extention Stem connection Bridge faucet assembly Detail A HOT label Shank Pin groove 8” 4-3/4” min.
PAGE 4
Adjust Handle Alignment: 1. In Figure 5, ensure cartridges in full closed position and check HANDLE alignment. If the HANDLE is not correctly aligned, temporary remove the HANDLE, loosen up (but do not completely remove) the ADAPTER SCREW and rotate CARTRIDGE ADAPTER one tooth clockwise (18 degrees), reassemble the HANDLE and recheck alignment. Repeat until the HANDLE is aligned. 2. Remove the HANDLE and tighten the ADAPTER SCREW to firmly secure the CARTRIDGE ADAPTER to cartridge. Reassemble the HANDLE.