Installation Sheet

INSTALLATION INSTRUCTIONS

COLD WATER DISPENSER

Model Nos:

106C, 107C, 107XC, 108C, 108XC

2470-5623, 2500-5623, 1200-5623

Congratulations on the purchase

of your Brasstech product,

an excellent choice, that will give you

years of quality service and enhance

the look and style of your home.

PAGE 1
INSTALLATION INSTRUCTIONS COLD WATER DISPENSER Model Nos: 106C, 107C, 107XC, 108C, 108XC 2470-5623, 2500-5623, 1200-5623 Congratulations on the purchase of your Brasstech product, an excellent choice, that will give you years of quality service and enhance the look and style of your home.
PAGE 2
Recommended Installation by a Professional Plumbing Contractor Note: The use of petroleum base plumbers putty on our products will nullify the warranty. We recommend the use of clear silicone sealing materials. Recommended deck thru hole Ø 1.25" to Ø1.38 INSTALLING FAUCET ON SINK (See Fig 1) · Place the faucet inlet and mounting stud through escutcheon, o-ring, and mounting surface hole.
PAGE 3
ATTACHING WATER SUPPLY CONNECTION (See Fig 2) · Slide the 1/4” OD supply tube (not included) through compression nut and compression sleeve. Place insert into end of tube. · Insert the end of tube into faucet inlet and thread compression nut onto the end of inlet. Faucet inlet Insert Compression sleeve Compression nut 1/4” OD Tubing (not included) Connect to water supply (not included) Figure 2 3.