Installation Sheet

ManualsBrandsNewport Brass ManualsShop All Newport BrassNewport Brass 2-Valve Rough In with 3/4" NPT Outlets

INSTALLATION INSTRUCTIONS

ROMAN TUB 3 VALVE AND TRIM

Valve Body No. 1-711, 1-712

Trim Model No's: FE-3-8707, FE-3-8807

Congratulations on the purchase of

this Newport Brass product,

an excellent choice, that will give you

years of quality service and enhance the

look and style of your home.

FE-3-8807

1-712

FE-3-8707

1-711

Summary of content (4 pages)

PAGE 1
INSTALLATION INSTRUCTIONS ROMAN TUB 3 VALVE AND TRIM Valve Body No. 1-711, 1-712 Trim Model No's: FE-3-8707, FE-3-8807 FE-3-8807 1-712 FE-3-8707 1-711 Congratulations on the purchase of this Newport Brass product, an excellent choice, that will give you years of quality service and enhance the look and style of your home.
PAGE 2
Rough in valve Installation Recommended Installation by a Professional Plumbing Contractor Note: Use plumbers tape or equivalent to seal all threaded joints. Plumb with 3/4” copper pipe is recommended. Warning: To prevent severe damage to valve body, any solder/braze process must be performed a min. of 4" from ports. 1. Place the mounting NUT (1) and WASHERS (2) on diverter VALVE (3). From underside of deck insert diverter VALVE (3) through appropriate hole of mounting deck.
PAGE 3
Table 1 SERIES STEM HEIGHT FE-3-8807 FE-3-8707 1-712 1-711 1-11/16" 1-1/4" TRIM INSTALLATION 1. Attach Handles to Valves. Any adjustments for rotational alignment must be made to the valve body - not to the cartridge. Secure handles into place with provided Set Screw. 2. Slide Spout into Spout Quick Connect (re-grease if necessary). Make sure spout is flush with deck and secure into place with Set Screw (not shown). See Figure 3. 3. Install Decorative Ring to Thread Deck Flange. 4.
PAGE 4
Disclaimer Regarding Brasstech Roman Tub with Hand Spray To conform to local codes and ordinances, all Brasstech Roman tub with hand spray products should be used in concert with an ASSE 1016 approved tempering valve to reduce the hot water supply to a safe temperature not exceeding 110°F (43°C).