User manual Your mouse a newly developed optical sensor that replaces the traditional mouse ball and users radio technology to communicate with your computer. The optical sensor accurately scans the surface of your desktop many times per second of smooth and fast cursor tracking on your computer screen. And because there are no moving parts. There is nothing to clean or adjust. The digital radio technology does not require line-of-sight placement and usage. Getting the receiver ready 1.
Getting the mouse ready 1. Tum over the mouse, and open the battery cover. 2. Insert the AA batteries inside the mouse battery compartment. 3. Replace the cover, and turn the battery power switch to “ON”.
Selecting the Frequency Channel Two frequency channels with the mouse. To prevent interference when two RF devices are used closely, please choose different channels for them. Method: 1. Set the frequency channel of the receiver Set the frequency channel of the mouse accordingly Receiver channel Installing the Mouse Software Windows 98/Me/2000/XP installation. 1. Place the driver into your CD-ROM player. 2. Click the Start menu and then click Run. 3. Click the CD-ROM's setup installation with the guide. 4.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance will void the user’s authority to operate the equipment. Any change to the equipment will void FCC grant. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.