User's Manual

NT-006i FM Transmitter Users Manual

1. Features:

1.1. High fidelity, stereo.

1.2. Digital PLL, transmission is stable in different environment.

1.3. Full frequency range.

1.4. Memory for last frequency.

1.5. Powered by iPhone / iPod.

1.6. Charging for iPhone / iPod with car adapter.(optional accessory)

1.7. Mutes the music during calls when connecting iPhone.

1.8. Range of up to 10 meters.

1.9. Blue backlight.

2. Specifications:

2.1. Frequency response: 100Hz~15000Hz

2.2. Separation: ≥30dB

2.3. Operating current: 35±3mA

2.4. Transmission range: 88.1MHz~107.9MHz (interval 0.1MHz)

2.5. Accessory: car adapter - DC2.5mm, input 12V-24V, output 5V 1A

2.6. Dimensions: D42.5mm x W26.5mm x H20mm

2.7. N.W.: 46g (with car adaptor), 10g (without car adaptor)

3. Compatible with:

3.1. Compatible with iPhone, iPhone3G, iPod classic, touch, nano 4G, nano 3G,

nano2G and Video etc.

4. Use Means:

4.1. Connect the FM transmitter to iPhone / iPod.

4.2. Tune into an unused (blank) frequency channel of the receiver and adjust the

volume of the receiver.

4.3. Press “+” or “-” button to adjust the frequency of the FM Transmitter according to the

receiver.

4.4. The FM transmitter will automatically save the last frequency when you disconnect

PAGE 1
NT-006i FM Transmitter Users Manual 1. Features: 1.1. High fidelity, stereo. 1.2. Digital PLL, transmission is stable in different environment. 1.3. Full frequency range. 1.4. Memory for last frequency. 1.5. Powered by iPhone / iPod. 1.6. Charging for iPhone / iPod with car adapter.(optional accessory) 1.7. Mutes the music during calls when connecting iPhone. 1.8. Range of up to 10 meters. 1.9. Blue backlight. 2. Specifications: 2.1. Frequency response: 100Hz~15000Hz 2.2.
PAGE 2
it. 4.5. When connecting iPhoneThe FM Transmitter will mute the music during calls and resume playing music after calls. FCC WARNING This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.