User's Manual Part 2

ManualsBrandsNewcont Electronic ManualsElectronics2.4GHz Digital Cordless Telephone

Getting Started

Handsfree

DeleteDelete

Talk/FlashTalk

MuteMute

MicrophoneMicrophone

CIDCID

SaveSave

Menu/SelectMenu

Exit/OFFExit

PhonebookPhonebook

FormatFormat

IntercomIntercom

Redial/pauseRedial/pause

Setting the Announce Mode

There is a default announcement as "Hello,please leave a message

after the tone".

If you want to modify the OGM,press and hold the OGM button then you

will hear"Please record an announcement after the tone",you can record a

new massage to cover the default one.

Use the [ANS On/Off] key to select between two answering modes: Answer

On, Answer Off. Typically the machine begins with answer on.

Recording an Announcement

Depending on which announce mode you are in, the answering machine

will record over that announcement.

1. Press [ANS On/Off] once. The answering machine is

turned off. “Answer Off” is heard and the message

counter is turned off.

2. Pressing the [ANS On/Off] key again time turns the

unit on. You will hear “Answer On.” The message

counter will display the current number of messages.

To record a new announcement:

1. Press and hold the [OGM] key. A beep

is heard. While you continue to hold down

the [OGM] key, say the message you want

recorded. You can record a greeting up to

30 seconds long.

2. When finished, release the [OGM] key. The NTP-6451A will beep and

play back your newly recorded message.

Note: To return to the default announcement (erasing the recorded ann

-ouncement), after the message has begun playing, press and

release the [DEL] key. A double beep will be heard and the unit will

return to the default outgoing announcement.

Answering System Operation

Summary of content (6 pages)

PAGE 1
Answering System Operation Getting Started Setting the Announce Mode There is a default announcement as "Hello,please leave a message after the tone". If you want to modify the OGM,press and hold the OGM button then you will hear"Please record an announcement after the tone",you can record a new massage to cover the default one. Use the [ANS On/Off] key to select between two answering modes: Answer On, Answer Off. Typically the machine begins with answer on. 1. Press [ANS On/Off] once.
PAGE 2
PAGE 3
Using the Handset Deleting Caller ID Calls 1. Press CID( ) to enter into caller ID list.Press to select the number/name which you want to delete. 2.Press Delete( ),the display shows" DELETED? " .PRress Delete( )again to delete the number/name. 3.If deleting all calls,Press and hold( ).the display shows" DELETE ALL? " Press DELETE( )to delete all calls. 4.Press( C )to return to standby mode.
PAGE 4
Setting up your Handset Using the Handset Telephone Setting Registering a handset You can have up to 4 handsets registered to a base station. To register a new expansion handset that has never been registered to a base station before: 1.Press ( OK ) 2.Scroll up and down to select REGIST-ER. 3.Press and hold PAGE on the base station for at least 6 seconds or until you hear a long beep and see the handset name, for example, Handset(2). 4.Press ( C )to return to the standby screen.
PAGE 5
Using the Handset Setting up your Handset Storing numbers in the phonebook Storing numbers in the phonebook makes it easy to dial numbers you can frequently. You can enter numbers directly into the phonebook or add them from the caller ID . The phonebook can hold 64 names and numbers. 1 Press Directory( ) 2.Scroll to (New Entry) and press ( OK ). 3.Enter the name (up to 11 characters). Press Cancel( ) to backspace and erase characters to the left of the blinking cursor.
PAGE 6
Setting up your Handset Using the Handset 6.Scroll down ( ) to move the next field. 7.Press ( OK ) to select date format(MM/DD or DD/MM). 8.Scroll down ( ) to move the next field. 9. Enter the current date. 10.Press SAVE( ). 11.Press ( C ) to return to the standby screen, or to scroll to a different menu option. Using the Handset Placing Calls( ) Press the Talk button. When you hear the dial tone, dial the number. Or enter the phone number, then press TALK( ).