USER MANUAL HDT301 Ver：V1.00.001 Statement:NEW CHIP owns the complete intellectual property rights for the software used by this product.For any reverse engineering or cracking actions against the software,NEW CHIP will block the use of this product and reserve the right to pursue their legal liabilities.
www.inewchip.com Copyright Information： Copyright © 2021 by SHENZHEN NEW CHIP INTELLIGENCE CO., LTD(hereinafter referred to as "NEW CHIP"). All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying and recording or otherwise, without the prior written permission of NEW CHIP. The information contained herein is designed only for the use of this unit.
www.inewchip.com You may contact SHENZHEN NEW CHIP INTELLIGENCE CO., LTD by visiting the website at www.inewchip.com, or contacting service@inewchip.com to request written permission to use materials on this manual for purposes or for all other questions relating to this manual. Safety Precautions and Warnings To avoid personal injury, property loss, or accidental damage to the product, read all of the information in this section before using the product.
www.inewchip.com Data and Software Protection Do not delete unknown files or change the names of files or directories created by others, otherwise the device software may not run. Tips: Access to network resources makes the device vulnerable to computer viruses, hackers, spy-ware, and other malicious behaviors, and may damage the device, software, or data.
www.inewchip.com Contents User Manual............................................................................................................................................. 1 1.Quick Start Guide.............................................................................................................................................. 2 1.1 Initial Use.......................................................................................................................................................
www.inewchip.com 1.Quick Start Guide 1.1 Initial Use Please enter the upgrade menu to upgrade the diagnostic software when you use the device for the first time. 1.2 Diagnostic Process Power on Connect the device to the vehicle Choose the vehicle type Choose the Diagnostic system 1.3 Function Menu Power on the host,the system will automatically enter into the function menu selection interface.
www.inewchip.com Intelligent Diagnosis:Fast scanning vehicle ECU based on artificial intelligence. HD OBD:Diagnose vehicles with universal protocols. Data:Including diagnostic records, diagnostic reports, OBD location, image view, etc. Feedback:Any abnormal of software or function during the diagnosis,just feedback to us, our professional technician will track and deal with it in time. Others:Online store etc. Upgrading:Diagnostic software upgrading. Setting:Unit,language,WIFI,volume setting etc. 1.
www.inewchip.com 1.6 Device Connections The connection steps are as follows: (1) Find the diagnostic socket on the vehicle. Most of the diagnostic sockets are standard OBD II diagnostic sockets (for non-standard OBD II vehicle diagnostic sockets, corresponding adapters are required), which are generally installed on the driver's side, away from the center of the dashboard 12 inches away. If you cannot find the location of the vehicle diagnostic socket, please refer to the vehicle maintenance manual.
www.inewchip.com 2.Basic Introduction 2.1 Product Profile Please enter the upgrade menu to upgrade the diagnostic software when you use the device for the first time. ① Display Screen ② Main Menu Button ③ Return Button ④ Confirm Button ⑤ Power on/off ⑥ Up/Down/Left/Right Button ⑦ Charging Slot ⑧ Diagnostic Interface 2.2 Device Operation The device can be operated on the touch screen or through the buttons below the screen.
www.inewchip.com 2.3 Parameters Operating System: Android Storage 16G RAM Battery Screen Working Temp. Storage Temp. Network Dimension 2G 6100mAh/3.7V 5inch HD touch screen 32° F ~ 122° F(0℃ ~ 50℃ ) 14° F ~ 140° F(-10° C ~ 60℃ ) Wi-Fi 214.5×103.5×35 mm 3.Begin to Use 3.1 Diagnosis Enter this menu and you can manually select the vehicle model and system to diagnose.
www.inewchip.com (2)Select vehicle brand and model:The the screen will enter the test project selection interface. (3)Select the system that you want to diagnose.
www.inewchip.com (4)Select the system brand that you want to diagnose. (5)Select the functions that you want to diagnose after entering the system.
www.inewchip.com a) Version information Tap Version Information button to read the version information of the current vehicle ECU. b) Read fault code This function is used to read the fault codes in the current vehicle ECU. ！ Tips:Reading fault code during vehicle diagnosis is only a small step during the entire diagnosis.The vehicle fault code is only as a reference and components cannot be replaced directly on the basis of the given fault code definition.
www.inewchip.com Screen buttons: Select all:If you want to check some data stream,tick the box before its name.If you want to choose all the data streams,tap this button.
www.inewchip.com Unselect:Tap this button to unselect all checked data streams. OK:Confirm current operations.Tap"OK"after selection,and then the system will display the dynamic data of selected data streams. Screen buttons: Graph:Displays the parameters of the selected data stream in waveform. Report:Tap this button to save the current data stream value. Record:Used to record diagnostic data for user playback and viewing.To stop reading,tap Stop (progress bar).
www.inewchip.com Select the data stream option to be viewed (Tips:You can only display up to 4 data streams), and the selected data stream waveforms will be automatically displayed.To remove the display of a data flow option waveform,just uncheck. How to view multiple waveform graphs ？ Tap the graph button to enter,and the system displays the parameters of the selected data in a waveform. Screen Buttons: Combine:Present the graphics in a combined way for user comparison.
www.inewchip.com e) Actuation Test This function is mainly used to test the operating components in the ECU. f) Special Functions Some vehicle models' systems have a special function menu, and the special functions supported by different models are different. In general, the special functions include the following items: DPF regeneration, injector coding,EGR, NOx reset, Adblue reset (diesel engine exhaust gas filter) etc.
www.inewchip.com 3.4.3 Data Stream Sample Used to manage recorded sample data stream files. 3.4.4 DLC Diagnostic socket position prompt. 3.4.5 Image View the screenshot on the device. 3.4.6 Screen Recorder View the Screen Recorder. 3.4.7 Firmware Fix If device does not work properly,download the latest version of the firmware and tap firmware fix button.Do not power off or switch the interface during the firmware fixing. 3.4.8 FAQ View the FAQ. 3.
www.inewchip.com Offline:Tap to view the diagnostic feedback for the upload failure due to network problems.Once the network is restored,the system will automatically upload to the server. Under the Diagnostic Feedback tab,tap the diagnostic record of the corresponding model to enter. Tap"Select File"to open the target folder,select the diagnostic log for feedback,and then select the corresponding diagnostic feedback problem type.
www.inewchip.com 3.8 Settings 3.8.1 Units of Measurement This option is used to switch between metric and English units. 3.8.2 E-mail E-mail Setting. 3.8.3 Display & Brightness Display and brightness setting. 3.8.4 Sounds Sound volume setting. 3.8.5 Wi-Fi WIFI network connection setting. 3.8.6 About Device parameter information display. 15 3.8.7 Clean up Cleaning up the cache.
www.inewchip.com 3.8.8 Version Version information view. 4.FAQ Here are answers to some common question about devices: 1. Can I use the same type of charger to charge the host? No,please use original charger.Our company is not responsible for any damage and economic loss caused by using charger which is not provided by NEW CHIP. 2.Why prompt for diagnostic interruption or communication error? The diagnostic cable connector may be loose.connect the connector properly and restar the device. 3.
www.inewchip.com 7.How about non-standard OBDII connector? There is a several non-standard adapters in the box,Follow the instructions to connect. 8.Why there are so many DTCs? It is usually caused by the poor connecting or the circuit grounded. 10.How to upgrade system software? Boot up and connect to the Internet properly,tap "Setting" on the main menu screen,and tap"About ->Version",and then tap"Detection system update"to enter the system upgrade page.
www.inewchip.com Warranty Policy This warranty applies only to users and distributors who purchase NEW CHIP products through normal procedures.Within one year from the date of delivery,NEW CHIP warrants its electronic products for damages caused by defects in materials or workmanship. Damages to the device or components because of abuse,unauthorized modification,use for non-designed purposes,operation in a manner not specified in the instructions,etc. are not covered by this warranty.
www.inewchip.com FCC & ISED Checklist FCC Warning: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
www.inewchip.com ISED Warning: This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
