AF-600 18” Outdoor Misting Fan OWNER’S MANUAL Read and save these instructions. Manual v1.
A Name You Can Trust Trust should be earned and we will earn yours. Customer happiness is the focus of our business. From the factory to the warehouse, from the sales floor to your home, the whole NewAir family promises to provide you with innovative products, exceptional service, and support when you need it the most. Count on NewAir. As a proud NewAir owner, welcome to our family. There are no robots here, real people shipped your product and real people are here to help you.
READ AND SAVE THESE INSTRUCTIONS. TABLE OF CONTENTS Register Your Product Online............................................................................... 4 Safety Information & Warnings ........................................................................... 5 Parts List ............................................................................................................... 7 Assembly & Installation .......................................................................................
REGISTER YOUR PRODUCT ONLINE Register Your NewAir Product Online Today! Take advantage of all the benefits product registration has to offer: Service and Support Diagnose troubleshooting and service issues faster and more accurately Recall Notifications Stay up to date for safety, system updates and recall notifications Special Promotions Opt-in for NewAir promotions and offers Registering your product information online is safe & secure and takes less than 2 minutes to complete: Register.NewAir.
SAFETY INFORMATION & WARNINGS If you feel the mist output is too strong and want to reduce the mist output, you can either turn the valve handle counter clockwise to reduce the water supply or change the fan speed from high to low setting. WARNING: When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: 1. Read all instructions before using this appliance. 2.
13. To disconnect, grip plug and pull from wall outlet. Never yank on cord. 14. Always use on a dry, level surface. Do not use the fan on the carpet as the mist may get the flooring. 15. Do not operate fan until fully assembled with all parts properly in place. 16. This product is intended for household use ONLY and not for commercial or industrial applications. WARNING: To reduce the risk of fire or electric shock, DO NOT use this fan with any solid-state speed control device. 17.
PARTS LIST Make sure all contents are present, take them out of the package, the contents should have included like Fig.1. NOTICE: There will be one replacement nozzle put in a bag and attached to the manual. Please keep it properly for future replacement.
ASSEMBLY & INSTALLATION BASE ASSEMBLY 1. 2. 3. Remove the four screws from the center of base. Place the Telescope Pole onto the Base, align the four screw holes in both parts, then insert each hole with the screw and tighten them together firmly with four washers and four nuts at the base bottom. (Fig. 2 & Fig. 3) Remove the Height Adjustment Knob, insert the cover from top of the Telescope Pole and slide it down onto the base. Raise the Inner Fig.
OPERATING INSTRUCTIONS Place the fan on a level surface. Plug the GFCI plug into a standard 120V 3prong wall outlet. OFF/SPEED SELECTION The fan speed is controlled by a pull chain switch located at the back of motor housing. Pull the string repeatedly to set the fan speed in the sequence of Low speed – Medium speed – High speed – Off. (Fig. 6) OSCILLATION To allow the fan to oscillate, push the Oscillation Knob down. Pull up this knob if oscillation is not desired. (Fig.
5. Turn the Valve Handle to “OFF” position to temporarily shut down the mist, if needed. http://www.NewAir.
CLEANING & MAINTENANCE Follow these instructions to correctly and safely care for your fan. ATTENTION: 1. Always unplug the fan before cleaning or disassembling. 2. Do not allow water to drop on or enter into fan housing. 3. To ensure adequate air circulation to the motor, keep the vents at the rear of the motor housing clear of dust, fluff, etc. Unplug the fan before using a vacuum cleaner to clean the grilles. It should not be necessary to disassemble the fan to clean it. 4.
If the misting nozzles become clogged, remove them from the grille and soak them in vinegar or a lime scale remover until the buildup is cleared. Use a non-metallic brush to scrub them, if necessary. If the obstacle still exists, use the replacement nozzles or contact the manufacturer. (Fig. 11) WARNING: Never clear the nozzles with pins or other sharp objects which may result in damage.
USER SERVICING INSTRUCTIONS LEAKAGE AND OVERCURRENT PROTECTION The plug of this misting fan was equipped with a leakage protection device. It will automatically cut off the circuit if any electricity leakage happens during operation. If this happens, examine the fan carefully to find out the cause, contact a qualified electrician for help, if needed. You can only restart the fan when the fault was removed. To restart the fan or every beginning of using the fan, press the RESET button first. (Fig.
STORAGE When storing your fan in the off season, it is important to keep it in a safe, dry location and protect the fan head from dust. We strongly recommend using the original box from purchase to pack it or cover it with plastic or cloth. TROUBLESHOOTING Problem The fan will not operate. Possible Causes The unit may be plugged in using a different voltage The circuit breaker may be tripped or there is a blown fuse.
LIMITED MANUFACTURER’S WARRANTY This appliance is covered by a limited manufacturer’s warranty. For one year from the original date of purchase, the manufacturer will repair or replace any parts of this appliance that prove to be defective in materials and workmanship, provided the appliance has been used under normal operating conditions as intended by the manufacturer.
