SKU: NAC08KWH00 3-in-1 Portable Air Conditioner OWNER’S MANUAL Read and save these instructions. Manual v1.
READ AND SAVE THESE INSTRUCTIONS. TABLE OF CONTENTS Register Your Product Online............................................................................... 3 Safety Information & Warnings ........................................................................... 4 Product Features .................................................................................................. 6 Assembly & Installation .......................................................................................
REGISTER YOUR PRODUCT ONLINE Register Your NewAir Product Online Today! Take advantage of all the benefits product registration has to offer: Service and Support Troubleshoot, diagnose, and service issues faster and more accurately Recall Notifications Stay up to date on safety, system updates, and recall notifications Special Promotions Opt-in for NewAir promotions and offers Registering your product information online is safe & secure and takes less than 2 minutes to complete: newair.
SAFETY INFORMATION & WARNINGS SAFETY PRECAUTIONS Please read the Manual carefully before operating the machine: • This unit is meant for household and indoor use only. Please place it in a dry environment. • Check power cord frequently. If power cord, plug or A/C unit is damaged, please do not use. • If the power cord is not long enough, an extension cord can be used. The cable should not be in an area where it could be pulled out accidentally, or where people might trip over it.
Special warning: • Place the A/C on even ground and install it vertically to ensure normal operation of the compressor. • The A/C should be at least 20 inches away from surrounding objects to allow for adequate air flow. • Do not use the A/C near gasoline or any other flammable liquid. • Do not use spraying agent or other solvents or flammable substances near the A/C; otherwise the product could be damaged. Power • The plug should be in good condition and free of damage.
PRODUCT FEATURES 1. 2. 3. 4. 5. Carrying Handle Control Panel Adjustable Front Grille Casters Exhaust Output 6. 7. 8. 9. 10. Air Intake Moisture Drain Plug Remote Control Exhaust Duct Window Sealing Plate newair.
CONTROL PANEL AND REMOTE CONTROL 1. Power button Press this button to turn the unit on and off. 2. Mode button Press this button to cycle between the 3 modes: cool (full A\C cooling with temperature setting), fan (just fan operation without any temperature setting) and dry (fan operation plus dehumidification). In dry mode, water will collect inside the unit, and must be drained by removing the plug from the bottom of the back of the unit.
7. Remote control sensor Point the remote control toward this sensor when using it. 8. Temperature mode button Press this button on the remote to switch between Fahrenheit and Celsius on the temperature display window. This can also be switched by pressing the temperature control buttons on the main control panel simultaneously. 9. Sleep button In cooling mode, you can press this button to enter sleep mode, which will decrease the fan speed over time and eventually shut off.
ASSEMBLY & INSTALLATION 1. Placement Place the unit on an even floor and in a dry place, and keep it at least 20 inches away from any other surrounding objects, e.g., walls, curtains, etc. 20 in 2. Installation Screw the exhaust duct into the exhaust opening on the back of the unit (counterclockwise) The exhaust hose extends up to 59 inches.
Insert the exhaust hose into the window sealing plate, and adjust the opening of the window so that the sealing plate fits in the window properly. (Note that the length of the sealing plate is adjustable) Ensure that the exhaust hose remains as straight as possible. A bent or curved exhaust hose will not work efficiently. Warning: This exhaust duct is designed specifically for this unit. Do not replace it or attempt to modify it, as it may cause the unit to malfunction. newair.
CLEANING & MAINTENANCE DRAINING THE WATER TANK This unit is equipped with an automatic water vaporization system. The condenser is cooled through the circulation of condensing water to improve cooling efficiency and energy conservation. If the tank is full, “FL” will appear on the display to indicate that it needs to be drained. Turn off the unit, remove the drain plug on the bottom of the back of the unit, and drain the tank until empty. Replace the plug and turn the unit back on to resume use.
DUST FILTER • Once every two weeks, remove the dust filter from the back of the unit and wash it. Neglecting to clean the dust filter may cause the unit to run poorly over time. SEASONAL CLEANING If you are planning on putting the unit away long-term: • Pull the drain plug to drain any water left in the tank. • Run fan mode for 2 hours to help dry any collected moisture within the unit • Turn off the unit and unplug it • Wash and replace the dust filter • Take apart the exhaust duct.
TROUBLESHOOTING In case of any of the following problems, please contact a NewAir™ authorized repair facility.
LIMITED MANUFACTURER’S WARRANTY This appliance is covered by a limited manufacturer’s warranty. For one year from the original date of purchase, the manufacturer will repair or replace any parts of this appliance that prove to be defective in materials and workmanship, provided the appliance has been used under normal operating conditions as intended by the manufacturer.