CLEARICE40 Countertop Clear Ice Maker OWNERS MANUAL Read and save these instructions. Manual v1.
READ AND SAVE THESE INSTRUCTIONS TABLE OF CONTENTS Register Your Product Online……………………………………………………………………………………………………..3 Important Safety Instructions……………………………………………………………………………………………………. 4 Preparing Your Ice Maker for Use……………………………………………………………………………………………… 5 Getting to Know Your Unit………………………………………………………………………………………………………… 7 Operating Procedures and Maintenance…………………………………………………………………………………… 8 Using Your Ice Maker……………………………………………………………………………………………………………….
Register Your Product Online Register Your NewAir Product Online Today! Take advantage of all the benefits product registration has to offer: Service and Support Diagnose troubleshooting and service issues faster and more accurately Recall Notifications Stay up to date for safety, system updates and recall notifications Special Promotions Opt-in for NewAir promotions and offers Registering your product information online is safe & secure and takes less than 2 minutes to complete: register.newair.
IMPORTANT SAFETY INSTRUCTIONS Your safety and the safety of others are very important. We have provided many important safety messages in this manual for your appliance. Always read and adhere to all safety messages. All safety messages will follow the safety alert symbol and the word “DANGER”, “WARNING” or “CAUTION” These words mean YOU CAN BE KILLED OR SERIOUSLY INJURED IF YOU DO NOT FOLLOW THE PROVIDED INSTRUCTIONS.
PREPARING YOUR ICE MAKER FOR USE IMPORTANT SAFETY TIPS WARNING: When using electrical appliances, basic safety precautions should be followed to reduce the risk of fire, electric shock and injury to persons or property. Read all instructions before using any appliance. 1. Do not operate this, or any other appliance, with a damaged cord. 2. Connect to properly polarized outlets only. No other appliance should be plugged into the same outlet. Be sure that the plug is fully inserted into the receptacle. 3.
DANGER: Risk of fire or explosion. Flammable refrigerant used. Do not use mechanical devices to defrost ice maker. Do not puncture refrigerant tubing. DANGER: Risk of fire or explosion. Flammable refrigerant used. To be repaired only by trained service personnel. Do not puncture refrigerant tubing. CAUTION: Risk of fire or explosion. Flammable refrigerant used. Consult the repair manual/owner’s guide before attempting to install or service this product. All safety precautions must be followed.
GETTING TO KNOW YOUR UNIT 1. 2. 3. 4. 5. 6. 7. Cover for water reservoir Lid Water separator pipe Evaporator Ice basket Ice scoop Control panel: easy to use, visible functions touch display setting: A. Add Water indicator B. Ice Full indicator C. Power indicator D. Power on/off button 8. Hot air outlet 9.
OPERATING PROCEDURES AND MAINTENANCE UNPACKING YOUR ICE MAKER 1. Remove the exterior and interior packaging. Check that the ice basket and the ice scoop are included. If any parts are missing, please contact our customer service. 2. Clean the interior with lukewarm water and a soft cloth. Take out the ice basket and clean it. 3. Find a location for your ice maker that is protected from direct sunlight and other sources of heat (i.e., stove, furnace, or radiator.) Place the ice maker on a level surface.
CLEANING AND MAINTAINING YOUR ICE MAKER WARNING: Before using your ice maker, it is strongly recommended to clean it thoroughly. After using your ice maker for a long time, we also suggest you clean your unit, especially the water separator pipe and water filters. 1. Take out the ice basket. 2. Clean the interior with diluted detergent, warm water, and a soft cloth. 3.
9. When cleaning, if you find that the ice cubes are left on the evaporator and cannot be taken out easily, you can turn on the unit to let the unit enter the ice making process, then press the “ON/OFF” button for more than five (5) seconds to let the unit start the ice making process to melt the ice cube. It will help you remove the hard ice cubes.
USING YOUR ICE MAKER 1. Remove the cover of the water reservoir and pour potable water into the water reservoir. Be sure to keep the water level below the marked maximum FILL level. CAUTION: entering. Replace the back cover at once to avoid foreign matter WARNING: Do not pour water into the internal water tank located underneath the ice basket. This tank is not big enough and will affect the ice making performance. 2. Plug in the main power supply plug.
USEFUL INFORMATION: After plugging in the unit, press the “ON/OFF” button for more than five seconds, then release to start the unit. The unit will add three minutes to each ice making cycle automatically to thicken the ice cube. If you want to thicken your ice cubes, turn off the unit first, then press the “ON/OFF” button again for more than five seconds to turn on the unit again. 4. While the ice maker is on, verify the water level of the internal tank located underneath the ice basket periodically.
TROUBLESHOOTING Problem Possible Causes The “ADD WATER” indicator is on. Lack of water. The “FULL ICE” indicator is on. There is too much ice. The big reservoir is full of water, but the “ADD WATER” indicator is always on. No water flow out from the water separator pipe. No water in the unit, but the “ADD WATER” indicator is not on and the unit cannot make an ice cube. Ice cubes are too weak and thin. The ice making cycle is normal, but no ice is made.
LIMITED MANUFACTURER’S WARRANTY This appliance is covered by a limited manufacturer’s warranty. For one year from the original date of purchase, the manufacturer will repair or replace any parts of this appliance that prove to be defective in materials and workmanship, provided the appliance has been used under normal operating conditions as intended by the manufacturer.
