Outdoor Furniture Dining Table SS-Natural Teak / Charcoal Alum-Natural Teak INSTALLATION GUIDE STOP ATTENTION: Is your Dining Table damaged? Need help or spare parts? For fastest service, contact NewAge Products at 1-877-306-8930; or support@newageproducts.com. Do not return to the retailer. IM-ODF.11A-01-Rev1.3 For the online installation manual and videos regarding this product, please check out our support hub: https://newageproducts.
Index Unpacking 2 Product Inspection 3 Product Specifications 3 Tools Needed 4 Hardware Included 4 Assembling the Dining Table 5 10 12 Cleaning and Care 14 NEWAGE PRODUCTS INC. OUTDOOR FURNITURE MANUFACTURER WARRANTY 15 Unpacking • Begin by placing the package on a covered flat surface. • Remove all cardboard and foam packaging material. • Dispose / recycle all packaging materials. • Verify all the contents in the box and gather the required tools. See “Tools Needed” section.
Product Inspection • • • • Check to see all parts are received as per the order placed. Contact NewAge Products at 1-877-306-8930; for any missing parts. Inspect the products for any damages before starting the installation. Go through the installation instructions carefully before starting the installation.
Tools Needed Socket Wrench Allen key Hardware Included Dining Table 72in - Charcoal Alum - Teak Hex Socket Head Screws M6x20 X8 M6 Lock Nuts X8 Hex Socket Head Screw M6X70 X8 M8 Lock Nuts X8 Hex Socket Head Screws M6x25 X8 Ø16mm Washer X32 Dining Table 72in - SS-Teak Hex Socket Head Screws M6x20 X16 M6 Lock Nuts X8 4 Hex Socket Head Screw M6X70 X8 M8 Lock Nuts X8 Dining Table 96in - Charcoal Alum - Teak Hex Socket Head Screws M6x20 X8 M6 Lock Nuts X8 Hex Socket Head Screw M6X70 X8 M8 Loc
Assembling the Dining Table 1 Place the two split tops (1) on their faces over a protective surface as shown in the image below. Make sure the pin inserts (3) and pin bolts(2) are available with the one of each split tops.
Assembling the Dining Table 2 Slide the connector blocks (4) outwards from both sides of the connector assemblies (5). 4 3 4 Attach two split tops by joining the two metal frames using the connector assemblies (4). Fix the connector blocks (5) of connector assembly into both the metal frames.
Assembling the Dining Table 4 Tighten two M6x20 screws (6) and 16mm washers (7) into the holes (A) on top surface of the frame assembly. For SS-Teak dining table: Insert two M6x20 screws (6) and 16mm washers (7) into the aligned holes of the Joint and tighten them using two M6 lock nuts (9) and 16mm washers (7). For Alum- Teak dining table: Insert two M6x25 screws (8) and 16mm washers (7) into the aligned holes of the Joint and tighten them using two M6 lock nuts (9) and 16mm washers (7).
Assembling the Dining Table 6 Attach legs (11) by fixing leg bolts through the holes at the corners of the frame assembly. 11 7 Secure the legs by fixing eight 16mm washers (12) and M8 lock nuts (13) at each corner to all leg bolts.
Assembling the Dining Table 8 Flip the dining table assembly to upright position and fix the removable umbrella hole cap(14).
Bill of Materials - 72in Dining Table 3 E 4 1 D 3 F 5 G C 2 5 B 2 5 1 5 12 10 10 11 10 10 9 13 DETAIL B DETAIL G DETAIL C 14 7 8 10 DETAIL E DETAIL D DETAIL F 10
Bill of Materials - 72in Dining Table Spare Part SKU# Description BOM QTY ODF-12.007A-01 91903 Outdoor Furniture Dining Table Split-Top Pin Bolt-Insert 4 9 H00136A-01 91972 M8 Lock Nut 8 10 H00336A-01 91967 Ring ID8 X OD16 X 2mm 32 11 H00317A-01 91971 Hex Lock Nut M6 8 12 H00394A-01 91944 JOINT CONNECTOR BOLT [JCBC] M6X70 16 15 H00313A-01 91961 Square Shoe 50X50X5mm 4 Item No. 7, 8 Part No. Charcoal Alum-Natural Teak 1 ODF-45.
Bill of Materials - 96in Dining Table 3 F G 4 1 3 5 C E D 2 5 B 2 10 5 1 12 10 10 7 9 13 DETAIL B 5 DETAIL G DETAIL C 10 14 DETAIL F DETAIL D 12 11 10 8 DETAIL E
Bill of Materials - 96in Dining Table Part No. Spare Parts SKU# Description BOM QTY ODF-12.007A-01 91903 Outdoor Furniture Dining Table Split-Top Pin Bolt-Insert 4 9 H00136A-01 91972 M8 Lock Nut 8 10 H00336A-01 91967 Ring ID8 X OD16 X 2mm 32 11 H00317A-01 91971 Hex Lock Nut M6 8 12 H00394A-01 91944 JOINT CONNECTOR BOLT [JCBC] M6X70 20 15 H00313A-01 91961 Square Shoe 50X50X5mm 4 Item No. 7, 8 SS - Natural Teak Teak 1 ODF-14.
Cleaning and Care Teak Parts • • • • • Remove debris with a soft nylon bristled brush Clean the surface using a sponge or damp cloth with water and mild soap. Soak up any excess water with a microfiber or lint-free cloth Allow the wood to dry naturally To help prevent staining on teak components, NewAge recommends applying Golden Care’s Teak Shield on our products.
NEWAGE PRODUCTS INC. OUTDOOR FURNITURE MANUFACTURER WARRANTY PROOF OF PURCHASE IS REQUIRED TO OBTAIN WARRANTY SERVICE. Please have the following information available when you call our customer service team: • Name , address and telephone number • Product Name / SKU Number • A clear , detailed description of the problem • Proof of purchase including order number Register your NewAge Products purchase online for quicker customer assistance and access to exclusive benefits Visit www.newageproducts.
NEWAGE PRODUCTS INC. OUTDOOR FURNITURE MANUFACTURER WARRANTY ONE YEAR LIMITED WARRANTY WOVEN FRAMES (FLAT ROPE AND WICKER) NewAge warranty covers Flat rope and Wicker woven on the frames for 1 YEAR.
MOBILIER D’EXTÉRIEUR Table de salle à manger Acier inoxydable - Teck naturel / Aluminium gris - Teck naturel GUIDE D’INSTALLATION STOP ATTENTION: Votre Table de salle à manger est-elle endommagée? Vous avez besoin d’assistance ou de pièces de rechange? Pour un service plus rapide, contactez NewAge Products au 1 877-306-8930 ou écrivez à support@newageproducts.com. Ne retournez pas ce produit au détaillant IM-ODF.11A-01-Rev1.
Déballage 2 Inspection du produit 3 Spécifications du produit 3 4 Matériel fourni 4 Assemblage de la Table de salle à manger 5 10 12 Nettoyage et entretien 14 NEWAGE PRODUCTS INC.
Inspection du produit • • • • Assurez-vous d’avoir reçu toutes les pièces conformément à la commande que vous avez passée. S’il manque des pièces, contactez NewAge Products au 1 877-306-8930. Avant de commencer l’installation, inspectez les produits pour y déceler tout dommage. Lisez attentivement les instructions d’installation avant de commencer l’installation.
Outils nécessaires Clé à douille clé Allen Matériel fourni Table de salle à manger de 72 po Aluminium gris - Teck naturel Aluminium gris - Teck naturel Vis à tête creuse hexagonale M6x20 X8 Vis à tête creuse hexagonale M6X70 X16 Vis à tête creuse hexagonale M6x25 X8 Vis à tête creuse hexagonale M6x20 X8 Vis à tête creuse hexagonale M6X70 X20 Vis à tête creuse hexagonale M6x25 X8 Écrou de blocage M6 X8 Écrou de blocage M8 X8 Rondelle Ø16mm X32 Écrou de blocage M6 X8 Rondelle M8 X8 Rondelle Ø
Assemblage de la Table de salle à manger 1 Placez les deux sommets fendus (1) sur sa face sur une surface de protection comme indiqué dans l’image ci-dessous. Assurez-vous que la goupille d’insertion (3) et le boulon d’axe (2) sont disponibles avec l’un de chaque sommet fendu.
Assemblage de la Table de salle à manger 2 Faites glisser les blocs de connexion (4) vers l’extérieur des deux côtés des ensembles de connecteurs (5). 4 3 4 Fixez deux dessus fendus en joignant les deux cadres métalliques à l’aide des assemblages de connecteurs (4). Fixez les blocs de connexion (5) de l’assemblage de connecteurs dans les deux cadres métalliques.
Assemblage de la Table de salle à manger Serrez deux vis M6x20 (6) et des rondelles de 16 mm (7) dans les trous sur la surface supérieure de l’assemblage du cadre. 4 Pour la table à manger SS-Teak:Insérez deux vis M6x20 (6) et des rondelles de 16 mm (7) dans les trous alignés du joint et serrez-les à l’aide de deux contre-écrous M6 (9) et de rondelles de 16 mm (7).
Assemblage de la Table de salle à manger 9 Fixez les pieds (11) en fixant les tire-fonds à travers les trous aux coins de l’assemblage du cadre. 11 10 Fixez les pieds en fixant la rondelle M8 (12) et les contre-écrous M8 (13) à chaque coin à tous les boulons de roue.
Assemblage de la Table de salle à manger 11 Tournez l’assemblage de la table à manger en position verticale et fixez le capuchon amovible du trou de parapluie (14).
Nomenclature - Table de salle à manger de 72 po 3 E 4 1 D 3 F 5 G C 2 5 B 2 5 1 5 12 10 10 11 10 10 9 13 DETAIL B DETAIL G DETAIL C 14 7 8 10 DETAIL E DETAIL D DETAIL F 10
Nomenclature - Table de salle à manger de 72 po N° d’article 7, 8 N ° de pièce Pièces de rechange SKU# La description Nomenclature Quantité ODF-12.007A-01 91903 Outdoor Furniture Dining Table Split-Top Pin Bolt-Insert 4 9 H00136A-01 91972 M8 Lock Nut 8 10 H00336A-01 91967 Ring ID8 X OD16 X 2mm 32 11 H00317A-01 91971 Hex Lock Nut M6 8 12 H00394A-01 91944 JOINT CONNECTOR BOLT [JCBC] M6X70 16 15 H00313A-01 91961 Square Shoe 50X50X5mm 4 Charcoal Alum-Natural Teak 1 ODF-45.
Nomenclature - Table de salle à manger de 96 po 3 F G 4 1 3 5 C E D 2 5 B 2 10 5 1 12 10 10 7 9 13 DETAIL B 5 DETAIL G DETAIL C 10 14 DETAIL F DETAIL D 12 11 10 8 DETAIL E
Nomenclature - Table de salle à manger de 96 po Pièces de rechange SKU# N° d’article N ° de pièce 7, 8 9 ODF-12.007A-01 H00136A-01 91903 91972 Outdoor Furniture Dining Table Split-Top Pin Bolt-Insert M8 Lock Nut 4 8 10 H00336A-01 91967 Ring ID8 X OD16 X 2mm 32 11 H00317A-01 91971 Hex Lock Nut M6 8 12 H00394A-01 91944 JOINT CONNECTOR BOLT [JCBC] M6X70 20 15 H00313A-01 91961 Square Shoe 50X50X5mm 4 La description Nomenclature Quantité SS - Natural Teak Teak 1 ODF-14.
Nettoyage et entretien Pièces en teck • • • • • • Retirez les débris avec une brosse à poils de nylon Nettoyez la surface à l’aide d’une éponge ou d’un chiffon humide avec de l’eau et un savon doux. Faites tremper tout excès d’eau avec un chiffon en microfibre ou non pelucheux. Laissez le bois sécher naturellement Pour aider à prévenir les taches sur les composants en teck, NewAge recommande d'appliquer le Teak Shield de Golden Care sur nos produits.
NEWAGE PRODUCTS INC. GARANTIE DU FABRICANT DE MOBILIER D’EXTÉRIEUR UNE PREUVE D’ACHAT EST REQUISE POUR OBTENIR UN SERVICE DE GARANTIE.
NEWAGE PRODUCTS INC. GARANTIE DU FABRICANT DE MOBILIER D’EXTÉRIEUR GARANTIE LIMITÉE D’UN AN CADRES TISSÉS (CORDE PLAT ET OSIER) La garantie NewAge couvre la corde plate et l’osier tissés sur les cadres pendant 1 AN.