Safety Instructions

• Blue – connected device ON / OFF
• Flashing – Wi-Fi setup mode
Indicator LED
Thank you for visiting !How it Works
Model – WF36M
Manual/program button
• ON/OFF control
• Pair to network
• Switch between auto and
• Restore factory defaults
manual setup modes
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference,
may cause undesired operation. changes or modifications not expressly approved
by the party responsible for compliance could void the user's authority to operate
the equipment.
(2) This device must accept any interference received, including interference that
FCC warning:
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installa-
tion. This equipment generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause harmful int-
erference to radio communications. However, there is no guarantee that interferen-
ce will not occur in a particular installation. If this equipment does cause harmful in-
terference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
NOTE:
This equipment complies with FCC radiation exposure limits set forth for an un-
controlled environment. This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
This equipment should be installed and operated with minimum distance 20cm
between the radiator& your body.
Risk of Fire / Risk of Electrical Shock / Risk of Burns
This device WF97M is intended for installation in accordance with the National
Electric Code and local regulations in the United States, or the Canadian Electri-
cal Code and local regulations in Canada. If you are unsure or uncomfortable
about performing this installation consult a qualified electrician.
Please DO NOT use this plug to control Medical or Life Support equipment.
This device should never be used to control the On/Off status of Medical and/or
Life Support equipment.
FCC Radiation Exposure Statement:
OTHER WARNINGS
CAUTION - PLEASE READ!
MEDICAL EQUIPMENT
IMPORTANT SAFETY INSTRUCTIONS
1. READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
2. Read and follow all instructions that are on the product or provided with the
3. do not use an extension cord.
4. Reference the National Electrical Code, NFPA 70, specifically for the installation
5. Installation work and electrical wiring must be done by qualified person(s) in acc-
6. do not install or use within 10 feet of a pool
7. do not use in a bathroom
8. WARNING:
9. WARNING:
10.WARNING:
SAVE THESE INSTRUCTIONS
– This manual contains important safety and operating
instructions.
Risk of Electric Shock.
Mount the unit at a height greater than 1 foot from the ground surface
Risk of Electric fire. install only to a receptacle protected by 20A branch
circuit over current protection.
Risk of Electric Shock.
When used outdoors, install only to a covered Class A GFCI protected receptacle
that is weatherproof with the power unit connected to the receptacle. If one is not
provided, contact a qualified electrician for proper installation. Ensure that the pow-
er unit andcord do not interfere with completely closing the receptacle cover.
of wiring andclearances from power and lighting conductors.
ordance with allapplicable codes and standards, including fire-rated construction.
product.
Voice control
A
D
Technical Guidance
B
The smart plug can be also used with
Amazon Echo and Google Home. Please
scan the QR code below and follow the
instructions if you have any trouble pairing
with them.
Amazon-Echo Google-Home
Compatible with Amazon
Alexa and Google Assistant
Follow the steps in the Amazon Alexa or
Google Assistant app to connect the
Smart Life app or select “Support” in
the app
Specifications
C
EASY TO SET UP
QR code
Download the app
Scan the QR code above or search
Smart Life on the Apple App Store or
on Google Play
SIZE: 360 x 127 mm
材质：80G 书写纸
单色黑白印刷
拆法：风琴页 120 x 63.5mm 成品
WF36M
If you have any questions, please contact us at
www.newonesmarthome.com
[e-mail]
Scan QR code or visit
Wi-Fi Mini Smart Plug
Wireless Frequency: 2.4GHz
125VAC 60Hz 15A
1875W General use
5A Tungsten
1/3 HP