Instructions / Assembly

Check Box for These Contents

In the event of missing or defective parts please call our customer service

dept. at

1 800 282 9346, ext #20

(Mon. to Fri. 8:00 AM to 4:00 PM EST).

Arched Top Rail

(1)

ost Caps (2)

osts (2)

Vertical Spindle Left

(1)

Vertical Spindle Right

(1)

Horizontal Spindles

(4)

Diamonds

(2)

Bottom Rail

(1)

9. Ground Anchoring Stakes (2)

10. Hardware (in plastic bag)

a) 5/8” Self-Auguring Stainless Steel Screws (12)

b) #2 Robertson Drill Bit (1)

Tools You Will Need

• Cordless Drill

• Hammer

• Tape Measure

• Level

• Shovel

General Information

• Read Instructions through carefully before beginning assembly.

• When assembling components, place on a non-abrasive surface

(i.e. shipping box) to avoid scratching.

• We recommend an area approx 5’x 8’ for unobstructed assembling.

• You should not need to use excessive force when assembling components.

The Milan Trellis

Please read through before starting assembly.

ASSEMBLY INSTRUCTIONS

www.edenarbors.com

Not to Scale

59.26

27.27

55.26

IMPORTANT: CHECK THE INSIDE OF YOUR POSTS FOR ALL MATERIALS.

PAGE 1
A S S E M B LY I N S T R U C T I O N S The Milan Trellis www.edenarbors.com 59.26 55.26 4 20 Please read through before starting assembly. 27.27 IMPORTANT: CHECK THE INSIDE OF YOUR POSTS FOR ALL MATERIALS. Check Box for These Contents In the event of missing or defective parts please call our customer service dept. at 1 800 282 9346, ext #20 (Mon. to Fri. 8:00 AM to 4:00 PM EST). 1. Arched Top Rail (1) 2. Post Caps (2) 3. Posts (2) 4. Vertical Spindle Left (1) 5. Vertical Spindle Right (1) 6.
PAGE 2
R STEP ONE L R Assemble the Side Panels L R Fig. 1 NOTE: There are locking tabs located at the ends of the horizontal rails. Once inserted and pushed into the routed holes, they will lock into place. 1 Layout the horizontal bottom rail and insert the two long vertical spindles. Ensure the routed holes on the spindles are orientated correctly to eventually receive diamonds (see Figure 1). The spindles are identified inside the notch at the top with either the letter L for Left or R for Right.
PAGE 3
Mounting Into the Ground 3 2 Trellises must be well secured in the event of high winds, etc. We have provided two ground anchoring stakes for securing the privacy screen either into the ground or into a concrete footing. If you are installing your trellis directly to the wall of your home, or on a wood deck or concrete surface, please see your hardware store for the appropriate galvanized bracket hardware.