Quick Guide

1. To power on, press and hold power
button for 3 sec.
2. LED will illuminate.
3. Listen for “NeuroTennis” announcement.
4. To play in partner mode, make sure both
devices are on, and follow instructions
for pairing devices under “Pairing”. For
solo mode, just press “Play” to begin.
5. To power off, press and hold power
button for 3 sec.
Charging
Powering On and Off
Your NT200 can typically run for about 2.5
hours on a full charge. Actual duration will
depend on factors such as coaching
instruction frequency and volume level.
To charge your device:
1. If your device is on, turn it off by pressing
and holding the power button for 3 sec.
2. Open charge port gently (see picture).
NOTE: Avoid getting moisture, clay, or dirt
into the charge port.
3. Plug in Android-style Micro-USB charger
(cable provided).
4. LED will blink while charging.
5. LED will turn solid when charging is
complete.
While in use, NT will tell you if its battery
level is low.
Overview of Buttons
Charging and Power
Pairing and Communication
NT Adjustments on the Court
Lesson and Drill Selection
Customizing Coaching Instructions, Drills
and Lessons
Editing and Copying Coaching Instructions,
Drills, and Lessons
Settings
Charging and Power Charging Done Powering On and Off Done
Quick Guide to NeuroTennis
Charging and Power