Quick Guide

The "Play/Pause" button controls which
lesson and drill you are using. Also use it to
pause or resume the current drill. A regular
press provides certain actions, and a long
press (press and hold for 3 seconds)
provides others, as explained below.
1. After powering on, you will hear the
current lesson name. Press “Play” to
start the lesson.
2. Your lesson is now running. At any time,
if you have not pressed “Play” in the last
5 sec., pressing it just reminds you of the
current drill.
3. To pause the drill, press and hold for 3
seconds.
4. To resume the drill, press “Play".
NOTE: NT announces when a drill reaches
the half-way point. In certain drills where
players take turns (e.g., being at the net),
this is a good time to switch places.
The default lesson is built into the NT device
and always available. If you have also
downloaded a custom lesson from the NT
app (see instructions on loading custom
lessons), you may want to switch back and
forth between the default and custom
lessons. Here’s how:
The simplest way to remember is this:
Press and hold “Play/Pause” for 3 sec., and
then do the same thing again. That’s it!
For a more detailed step-by-step
explanation, follow these steps:
1. Whichever lesson you are on, pausing is
the first step to switching. Press and hold
“Play/Pause” for 3 sec. to pause the
current drill.
2. You will hear instructions telling you to
press and hold “PLAY/PAUSE” for 3 sec.
AGAIN in order to switch to the other
lesson.
3. Press and hold as instructed until NT
announces the lesson name.
NOTE: If your second press is not held for 3
sec., you will just resume the current lesson.
If you still want to switch lessons, just go
back to step 1.
1. As mentioned if you have not pressed
“Play” in the last 5 sec., pressing it just
announces the current drill.
2. Press “Play” again within less than 5 sec.
to move to the next drill.
NOTE: If you want to go forward several
drills, just keep pressing play until you reach
the drill you want. When you pass the last
drill in the lesson, NT will start again at the
first drill.
1. One minute before the end of a drill, you
will hear a chime and a time warning. NT
offers you a chance to extend the drill, in
case you feel like continuing.
2. To do this, press “play” within 5 sec. of
the chime.
Playing and Pausing Drills
Moving to the Next Drill
Extending the Current Drill’s Duration
Switching Between Default and Custom
Lessons
Overview of Buttons
Charging and Power
Pairing and Communication
NT Adjustments on the Court
Lesson and Drill Selection
Customizing Coaching Instructions, Drills
and Lessons
Editing and Copying Coaching Instructions,
Drills, and Lessons
Settings
hold for 3 sec.
Lesson and Drill Selection Playing and Pausing Drills Done Moving to the Next Drill Done Done Done
Extending the Current Drill’s
Duration
Switching Between Default and
Custom Lessons
Quick Guide to NeuroTennis
Lesson and Drill Selection