Orb Pro Quick Guide NI-3231
Catalogue 1. Warning P. 1 2. What’s In The Box P. 2 3. Camera Structure P. 3-4 4. Read Before Installing P. 5 5. Set Up With Netvue App P. 6 6. Mount Your Orb Pro P. 7-10 7. Status Light P. 11 8. Netvue Protect Plan P. 12 9. Contact Us P.
FCC Warning This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any inte rference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
What’s In The Box Drilling Template Mounting Bracket Orb Pro Quick Guide Quick Guide X2 Mounting Screws Power Adapter X2 Orb Pro Anchors 2
Camera Structure Light Sensor Lens Microphone Micro SD Card Slot Status Light 3
Heat Emission Hole Speaker Power Port SET Wi-Fi Configuration Button 4
Read Before Installing 1. Keep Orb Pro and all accessories out of reach of children and pets. 2. Orb Pro comes with a power adapter. If you prefer other power adapters, please make sure that they allow a DC5V power supply voltage, and an electric current not less than 1A . 3. Working temperature: -10°C to 50°C (14°F to 122°F) Working relative humidity: 0-95% 4. Please do not expose the camera lens to direct sunlight. Note: 1. Netvue Orb Pro only works with 2.4GHz Wi-Fi. 2.
Set Up With Netvue App Download Netvue App from App Store or Google Play. Follow the in-app instruction to complete the entire set up process.
Mount Your Orb Pro You can choose to install it against the wall, under the ceiling, or directly on the desktop. 1 2 1. Use the provided drilling template to mark the position of holes on your wall. Use drill bit (15/64", 6mm) to drill two holes, and then install anchors to hold screws.
2. Install the Mounting Bracket on your wall with the Screws provided.
1 2 3. Put the bottom of Orb Pro against the mounting bracket in the direction as shown above, and then rotate counterclockwise to secure it.
355° 105° 355° 105° 4.Now you can turn around your Orb Pro horizontally and vertically using Netvue App.
Status Light Status Light Description Solid Blue Online Rapidly Flashing Blue Wi-Fi Configuration Mode Solid Red Offline 11
Netvue Protect Plan Netvue Protect Plan provides optional advanced features for those with higher security needs, and each plan supports multiple devices. Continuous Video Recording Event Video Recording Human Detection ... Visit my.netvue.com to learn more.
Contact Us Feel free to contact us for additional help: support@netvue.
Netvue Web Client www.netvue.