Quick Start Guide
More About Orb Cam Packing List Reset Support hole Bottom Orb Cam X1 Power input TF card Light Sensor Power Adapter *1 Screw Accessories *1 Night Vision Lights Lens Indicator Light Speaker Microphone Mounting Bracket *1 Location *1 Side
Download Netvue App Power On Device LED Indicator Status Green A.Flash slowly:Connecting server. B.Solid green:Connected server C.
Add Device Open the app Register account 1. Open the APP,register an account and log in. Add device Choose Netvue Ord Cam 2. After logging in,click“+”sign,and choose Netvue Orb Cam.
Connect power 3.Configure WiFi step by step.
Notes 1. Use a valid email address to register your account. 2. Keep the device in a 2.4G WiFi environ ment with good signal. 3. After connecting to power, the device will make a “Di” sound for 3 seconds. Afterwards press the reset button, the indicator light will then flash rapidly. 4. Strong lights may interfere with the ability for the device to read the QR code. Device added Device list 4.Device added successfully.Return to app home page,your device should appear in the list of device. 5.
App Features Congratulations !You have completed installtion of your camera, you can watch your home anywhere and anytime。
Caution 1. The device should be kept in open areas and be away from metal. Avoid placing behind furniture or near microwaves. Keep away from areas with lots of cables if possible. Try to keep your device within range of your Wi-Fi signal. 2. If you want to move the device to a new Wi-Fi environment, reconfigure the Wi-Fi settings by following the instruction on the app.
Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Manufacturer's Name: NetVue Technologies Co. Ltd. Model number: Netvue Orb Cam Operating Temperature: -20° C to 40° C 3. The plug considered as disconnect device of adapter. 4. The device complies with RF specifica tions when the device used at 20cm form your body. This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 20cm must be maintained between the user’s body and the handset, including the antenna.