R100H Wireless Module Wireless Module NETVOX TECHNOLOGY CO., LTD. Add:No. 21-1 Sec. 1 Chung Hua West Road, Tainan, Taiwan Tel: +886-6-2617641, 2654878 Fax:+886-6-2656120 http://www.netvox.com.
R100H Wireless Module Product Description The Lora RF module R100H offered by NETVOX is low power consumption transceiver based on the SX1276 chip LoRaTM solution. The R100H is designed to be SMD-mounted onto a host PCB. SMD-mounting provides the best RF performance at the lowest cost. Additionally the R100H is designed to occupy minimal board space on the host PCB, which already includes plentiful interfacing ports and power management circuits.
R100H Wireless Module Key Features High performance and low power 32-bit ARM Cortex-M0 microprocessor Powerful and flexible development tools available Electric Specifications Performance Antenna Type: FPC antenna Antenna Gain: 0.98dBi Frequency Band 902MHZ ~ 928MHz Mode of emission LoRa/FSK -121dBm Receiver Sensitivity (Frequency deviation=5kHz,Bit Rate=1.
R100H Wireless Module Absolute Maximum Ratings Parameter Min Max Unit Supply voltage -0.5 3 V Voltage on any pin -0.3 VCC+0.
R100H Wireless Module Pin Assignment 5 GND i-PEX 1 28 GND /RST 2 27 VCC SWDIO 3 26 VCC SWCLK 4 25 PB2 VCC 5 24 PB1 PA12 6 23 PB0 PB7 7 22 PA0 PB6 8 21 PA1 PA14 9 20 PA2 PA13 10 19 PA3 PA15 11 18 PB5 PB3 12 17 PB8 PB4 13 16 GND GND 14 15 GND SX1276 STM32L051 Figure 3 Pin assignment -6-
IC Statement: This device complies with Industry Canada’s licence‐exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.