ZigBeeTM- Combined Interface User Manual Combined Interface Model: Z108A 20140630 FW V1.0 (20140611) HW V1.
Table of Contents 1. Introduction..................................................................................................................................... 2 2. Product Appearance ....................................................................................................................... 3 3. Specification .................................................................................................................................... 4 4. Installation................................
1. Introduction Netvox Z108A, a ZigBee USB Dongle, acts as a coordinator or a router in ZigBee network. It is designed for a computer or a gateway to communicate with ZigBee network. Users can search devices, send commands, control devices, or perform customized scheduling using ZigBee applications. What is ZigBee? ZigBee is a short range wireless transmission technology based on IEEE802.15.4 standard and supports multiple network topologies such as point-to-point, point-to-multipoint, and mesh networks.
2.
3. Specification y Fully IEEE 802.15.4 compliant y Utilizes 2.4GHz ISM band; up to 16 channels y Power supply: USB port y Receiver Sensitivity: -100 dBm y Receiving consumption < 30mA y Transmitting consumption < 42mA y Up to 350 meters wireless transmission range in non-obstacle space y Easy installation and configuration 4. Installation y Plug Z108A into the USB port of a computer or a laptop. 5. Setting up Z108A 5-1. Join the ZigBee Network Z108A can act as: A.
5-3. Switch Transmission Mode Z108A performs two transmission modes: the data-transmission mode (default) and the command-transmission mode. To switch the modes, please use this command format: 02 Cmd=0x0FFE Len=0x11 Data CRC The command to switch to data-transmission mode "020FFE117777772E6E6574766F782E636F6D2E636ECB" It is actually "www.netvox.com.cn" After it switches to data-transmission mode successfully, the stream "021FFE0100E0" is returned.
Step2. Click Yes. Step3. Choose Z103 in Please Select Device Type. Step4. Choose Port and click Test.
Step5. It shows Successful Connection when the test is succeeded; otherwise, it shows Connection Failed. Step6. Click Save and Close to complete the setting.. 5-5. Restore to Factory Setting To restore Z108A to factory setting, please use ZigBee applications.
6. Home Automation Clusters for Z108A A cluster is a set of related attributes and commands which are grouped together to provide a specific function. A simple example of a cluster would be the On/Off cluster which defines how an on/off switch behaves. This table lists the clusters which are supported by Z108A. 1.End Point(s)：0x0A 2.Device ID：Combined Interface（0x0007） 3.
0x0007 0x0010 0x0011 0x0012 PowerSource LocationDescription PhysicalEnvironment DeviceEnabled 8-bit 0x00 – Enumeration 0xff Character 0 – 16 string bytes 8-bit 0x00 – Enumeration 0xff Boolean 0x00 – 0x01 9 Read only 0x04 Read/write M O Read/write 0x00 O Read/write 0x01 M
7. Important Maintenance Instructions • Please keep the device in a dry place. Precipitation, humidity, and all types of liquids or moisture can contain minerals that corrode electronic circuits. In cases of accidental liquid spills to a device, please leave the device dry properly before storing or using. • • Do not use or store the device in dusty or dirty areas. Do not use or store the device in extremely hot temperatures. High temperatures may damage the device or battery.
