User Manual

Product Diagram Main Parameters
Functional Operation
Please read this manual carefully before use
2 in 1 Wireless Receiver
and Transmitter
GB
USER GUIDE
Indicalor light
Transmitter Mode(TX)
Receiver Mode(RX)
Power button/Multi-functional button
Charging port(Micro-USB)
1.Turn on/ off: Press the button and hold 2s to turn
on, the red indicator light flashes after power on
the default power is fired.Long press the button
2S shutdown. The red light is off.
Bluetooth version: 4.2
Bluetooth protocol support: A2DP and AVRCP
Support multi-format decoding: MP3,WAV, WMA,
APE,FLAC
Transmission distance: ≥10M（open place）
Charge input voltage: DC 5V
Power supply: 3.7V
Power consumption: play in less than 20 mA,
standby in
0.6-4.5mA, shut down in 2 micro amps
Working time: ＞10H
Charging time: 2H
SIGNAL-NOISE RATO: more than 95db
Transmitter Mode:
2. Plug the 3.5mm audio cable into its RX port,
and plug the other end of the audio cable into the
audio input interface of Non-Bluetooth device
(such as old speaker, car stereo).
3. Turn on the Bluetooth of your phone/tablet and
search for available Bluetooth nearby. The
Bluetooth name of this device is Wireless Music
Adapter, find it and connect.
4. After the connection is successful, the indicator
light will be steady blue.
Watching TV or playing games quietly. It can pair
with your bluetooth headsets or speakers.
Matching steps:
1. Long press the power button to turn on the
device and check if the indicator light is red. If it is
not red, short press the button to switch to red
light.
2. Plug the 3.5mm audio cable into its TX port, and
plug the other end of the audio cable into the audio
output interface of Non-Bluetooth device(such as
tablet, MP3, CD player, computer, TV).
3. Turn your Bluetooth speaker/headphone to
Bluetooth pairing mode, wait a few seconds, they
will automatically pair and connect. And the red
indicator light will illuminate steadily.
Notes: Please turn off other Bluetooth devices to
avoid Bluetooth pairing failure.
Notice
1.Different Bluetooth devices (such as Bluetooth
headset have difference use program and the
agreement. The searching connection time will be
difference.
2.If the pairing connection fails or can not be
connected for a light time, you can shut down and
then pair again.
3.This product has built-in rechargeable battery for
long standby and use. It is recommended that
you fully charge before you use it for the first
time.
4.The red light is on when charging and the red
light goes off after charging is completed, You
can play music when charging. When the power
is too low but you still want to use the product,
you can enjoy the music while charging.
5.Play the music that has been paired firstly.
Please cancel the pairing with the unused device
and reset the pairing device according to
reference of the manual.
6.The working mode of the product should be
based on the mode indicator.The product default
boot mode is the transmitter. If the two
headphones jacks of the product are plugged by
the audio cable, the product will default to the
transmitter mode.
7.Please check if the working mode of the product
is correct. The 3.5MM audio cable is inserted
into the corresponding headphones jack. The
device’s operating mode can be determined
according to the light.
8.If it can not connect the Bluetooth device (such
as Bluetooth headset), the Bluetooth receiver
can be close to some distance, or the Bluetooth
audio power.
Package Included:
1* 2 in 1 Bluetooth Transmitter&Receiver
1* Charging Cable
1* 3.5mm AUX Audio Cable
1* User Guide
Technical Support:
Email: [e-mail]
Website: www.zq-netvip.com
We welcome you to send any opinions to us.
Our service team us online for you all the time(7/24)!
2.Automatic shutdown function: When the product
is in the unconnected state after 5 minutes, it will
automatically enter the sleep power mode, the
indicator will go off.
3.This product has Multi-functional switch button.
Long press 2 seconds to turn on the machine
ans short press to switch “receiver” and
“Transmitter” mode.
Receiver Mode:
Turn your speaker into wireless. It can pair with
your bluetooth enabled phones,MP3,tablets,etc.(-
Suitable for all audio equipment with audio input
interface)
Matching steps:
1. Long press the power button to turn on the
device and check if the indicator light is blue. If it
is not blue, short press the button to switch to blue
light.
[e-mail]