User Manual

3. Pay attention to direction when you install the lamp. The lamp should be inside of monitor and
clip is outside of monitor；
4. Connect the USB wire to computer interface or 5V/1A phone charger or portable battery. It can
be used when power is on；
5. The brightness and color temperature can be adjusted by 4-keys controller, choose color and
brightness as your need；
6. Beam angle and lighting area can be changed by rotating the lamp body to choose the most
suitable brightness for working；
7. Smooth the redundant wire and put the controller in a convenient position for adjustment；
2. Installation Diagram (For reference only)
1. In the process of installation and use, it is not allowed to beat and bend the lamp body to
avoid deformation or damage of the lamp;
2. When selecting phone charger, portable battery or other power supply equipment, confirm
that the output voltage is DC5V and the rated current is not less than 1A;
3. Please don’t dismantle it by yourself because the structure is complicated.It is easy to
damage the product and cannot be recovered if it is dismantle by yourself;
4. The Steps of taking off the lamp should be: turn off the power supply, take out USB wire,
take off clip.
5
Smart Eye Protection Lamp for
Laptop - CCT and Dimming Type
Operation Instruction
Work study lighting,
care for your eyes
Tips：please read this instruction before you use it
Cautions:
1. Take the lamp out from the box, open the black velvet bag, checking the goods whether it’s
complete.
2. Read the user manual, untie the cable and open mounting clip, install the clip on the middle
position of screen top carefully；
Installation Step:
4
Highlight Strips
Traditional lighting
The direction of looking
at the screen
The direction of looking
at the screen
Smart Eye Protection Lamp
The light on the screen
will reflect back which
will cause eyestrain
Eye Protection lamp, beam angle
and lighting area is adjustable. All
lights focus on the keyboard and
working area, no glare.
Clip is outside of monitor