AirMagnet Enterprise Sensor 4 Series SmartEdge Sensor
Table of Contents Copyright .......................................................................................................................1 AirMagnet Enterprise Sensor 4 Series SmartEdge Sensor ........................................ 2 Special Notes ...............................................................................................................2 Introduction ..................................................................................................................
Table of Contents Industry Canada Interference Statement ................................................................. 18 Industrie Déclaration de Canada ............................................................................. 18 Déclaration d'Exposition de Radiation d'IC .............................................................. 19 Industrie Déclaration d'Interférence de Canada ....................................................... 19 EU Declaration of Conformity .............................
Copyright AirMagnet Enterprise Sensor 4 Series SmartEdge Sensor. © 2012 Fluke Corporation, Inc. All rights reserved. This document is furnished under license and may be used or copied only in accordance with the terms specified in the license. The content of this document is furnished for informational purposes only and should not be construed as a commitment on the part of AirMagnet. AirMagnet. reserves the right to modify the content of this user guide without notice.
AirMagnet Enterprise Sensor 4 Series SmartEdge Sensor Special Notes AirMagnet Enterprise Sensor 4 Series SmartEdge Sensor technical documentation (in PDF format) can be downloaded by registered customers from the "Documents / Downloads" section of their My AirMagnet account. See http://airmagnet.flukenetworks.com/my_airmagnet/ Introduction AirMagnet Enterprise Sensor 4 Series SmartEdge Sensor represents the next generation in 3X3 11n sensor technology.
AirMagnet Enterprise Sensor 4 Series SmartEdge Sensor Sensor Model Features SENSOR4-R1S1-I AIRMAGNET SPECTRUM SENSOR, 3X3 802.11n radio quantity 1, INTERNAL ANTENNA. SENSOR4-R2S0-I AIRMAGNET SENSOR, 3X3 802.11n radio quantity 2, INTERNAL ANTENNA. SENSOR4-R2S1-I AIRMAGNET SPECTRUM SENSOR, 3X3 802.11n radio quantity 2, INTERNAL ANTENNA. SENSOR4-R1S0-E AIRMAGNET SENSOR, 3X3 802.11n radio quantity 1, 4 EXTERNAL ANTENNAS. SENSOR4-R1S1-E AIRMAGNET SPECTRUM SENSOR, 3X3 802.
Installation External Antenna Port Assignments Use the following table and associated diagram to determine antenna port assignments for each external antenna sensor model.
Installation Installation Sensor Zero Configuration The sensor comes with a zero configuration feature that enables users to place the Sensor on their network and have it automatically find and connect to the AirMagnet Enterprise Server without having to configure the Sensor first. This concept simplifies the process of configuring and managing Sensors during deployment. It also reduces the overhead during regular maintenance cycles.
AirMagnet Enterprise Sensor 4 Series SmartEdge Sensor Installing the Sensor on a T-Rail The ceiling of a building is an ideal place for installing the sensor in terms of FOV. You can place the Sensor anywhere on a T-rail on the ceiling using the integrated T-rail clip. 1. Place the bottom side of the sensor over the T-rail at a 45 degree angle between the two circular clips as shown. 2. Rotate the sensor until the sensor snaps into place.
Installation Antenna Installation 1. Screw on the supplied antennas to the RP-TNC connectors on the sensor side plates. 2. Position the antenna angles as shown in the following "Antenna Angle Positioning" section. 3. Hand tighten the antenna to the sensor while maintaining the angles depicted. 4. Apply a small amount of Loctite or similar adhesive in the antenna joint (elbow) to maintain antenna angle positioning during and after sensor installation.
AirMagnet Enterprise Sensor 4 Series SmartEdge Sensor 8
Powering Up Sensors Power Options Customers deploying AirMagnet Enterprise can power their AirMagnet sensors using a standard Ethernet cable, thus avoiding the need to run the standard electrical wiring to each and every individual sensor. AirMagnet offers two Power over Ethernet (PoE) options, and customers can typically make their own choice based on the quality of the switch to which their AirMagnet sensors will be connected. Powering Up via an 802.
AirMagnet Enterprise Sensor 4 Series SmartEdge Sensor Status LEDs LED Color Description Solid – Power on Normal Power Blue Flash – sensor on but not ready – configuration.
Specifications Electrical Specifications Specification Detail Operating Voltage 12VDC +/- 5%; 48V+/-10% (802.3af PoE) Current Consumption Max. 850 mA (12VDC); 210mA(48V PoE) Processor Marvell 88F6282, 1.86 GHz WiFi Silicon Atheros 9380 Mini-PCIe, Dual-band 802.11 n/a/b/g 3 spatial stream. Commercial Temp System Memory 256MB DDR3 Input Power Requirement PoE 802.3af Compliant or +12VDC 802.11an/gn 3SS HT20 MCS 0-23 : 216.7 Mbps max HT40 MCS 0-23 : 450 Mbps max Data Rates 802.
AirMagnet Enterprise Sensor 4 Series SmartEdge Sensor Specification Detail 802.11n: 5 GHz band -63dBm @ 135Mbps -61dBm @ 270Mbps -59 dBm @ 450Mbps 802.11n: 2.4 GHz band -63dBm @ 130Mbps -61dBm @ 270Mbps -59 dBm @ 450Mbps 802.11a: Receive Sensitivity (Typical) -85dBm @ 6Mbps -86dBm @ 9Mbps -85dBm @ 12Mbps -83dBm @ 18Mbps -78dBm @ 36Mbps -73dBm @ 48Mbps -82dBm @ 24Mbps -72dBm @ 54Mbps 802.
Specifications Specification Detail 802.11n: 5 GHz band 14~15dBm @ 135Mbps 9~11dBm @ 270Mbps 7~10dBm @ 450Mbps 802.11n: 2.4 GHz band 17dBm @ 135Mbps 12dBm @ 270Mbps 11dBm @ 450Mbps Transmit Output Power (Typical) 802.11a: 14~15dBm @ 6-24Mbps 14~15dBm @ 36Mbps 11~13dBm @ 48Mbps 11~12dBm @ 54Mbps 802.11g: 16dBm for all rates 802.
AirMagnet Enterprise Sensor 4 Series SmartEdge Sensor Item Detail Serial Port External Connector required, DB-9 male, RS-232 null modem External Switch Reset switch DC in Connector DC power input jack. RP-TNC for external models only. RF Connector Standard Antenna (Dual Band 2.4G/5G) Internal models PCB antenna: Qty 3, 6, or 7 depending on internal antenna model. External models SWIVEL R-TNC PLUG omnidirectional dipole: Qty. 4 or 8 depending on external antenna model.
Specifications Specification Detail Length 143.5 mm (approximately 5.65 in.) Color White Operating Frequency: 2.4 ~ 2.4835 & 5.15 ~ 5.35 & 5.725 ~ 5.85 GHz Polarization Type: Linear Radiation Type: Toroidal Antenna gain: Electrical 2.0 dBi max (2.4 ~ 2.4835 GHz) 2.3 dBi max (5.15 ~ 5.35 GHz) 1.0 dBi max (5.725 ~ 5.85 GHz) Impedance: 50 Ohm nominal V.S.W.R.: 2.0:1 max.
AirMagnet Enterprise Sensor 4 Series SmartEdge Sensor Specification Detail Operating Frequency: 2.4 ~ 2.4835 & 5.15 ~ 5.35 & 5.725 ~ 5.85 GHz Polarization Type:Vertical, Omni directional Antenna gain: 0.9 dBi max (2.4 ~ 2.4835 GHz) Electrical 3.1 dBi max (5.15 ~ 5.35 GHz) 4.8 dBi max (5.725 ~ 5.85 GHz) Impedance: 50 Ohm nominal V.S.W.R.: 2.0:1 max. Sensor RF Connectors (External Antenna Models) The sensor comes with 4 or 8 reverse polarity RP-TNC RF connectors (depending on model purchased).
Standards Compliance Standards and Agency Compliance All products to be certified or tested to the following: Item Detail RoHS lead free.
AirMagnet Enterprise Sensor 4 Series SmartEdge Sensor This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
Standards Compliance Déclaration d'Exposition de Radiation d'IC Cet équipement se plie aux limites d'exposition IC de radiation présentées pour un environnement non maîtrisé. Cet équipement devrait être installé et fait marcher avec la distance minimale 20 centimètres entre le radiateur et votre corps.
AirMagnet Enterprise Sensor 4 Series SmartEdge Sensor EN 301 489-1 V1.8.1: (2008-04) Electromagnetic compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements. EN 301 489-17 V1.3.
Standards Compliance CSA 21
Support Hardware Warranty LIMITED WARRANTY AND LIMITATION OF LIABILITY Each fluke networks product is warranted to be free from defects in material and workmanship under normal use and service unless stated otherwise herein. The warranty period for the mainframe is one year and begins on the date of purchase. Parts, accessories, product repairs and services are warranted for 90 days, unless otherwise stated.
Support 90 days AirMagnet Express Field Kit 90 days (netbook batteries not included) Fluke Networks authorized resellers shall extend this warranty on new and unused products to end-user customers only but have no authority to extend a greater or different warranty on behalf of Fluke networks. Warranty support is available only if product is purchased through a Fluke Networks authorized sales outlet or Buyer has paid the applicable international price.
AirMagnet Enterprise Sensor 4 Series SmartEdge Sensor Product Support Fluke Networks' Gold Support is our comprehensive support and maintenance program that offers expanded coverage for all AirMagnet products. Benefits of the Gold Support program include: • Access to live 24 X 7 technical support.* • Highly trained technical experts to help with product installation, configuration, best practices & troubleshooting on call 24 hrs a day including weekends and through the night.