Handwriting Tablet ED0Q02 Thank you for choosing this eReader with handwriting tablet. Before using your tablet, carefully read this quick-start guide before it is activated to work. Box contents: Before using this tablet at the first time, please check the content of the package. If any of the following items is not in the package, please contact the retailer where you purchased this tablet.
INSTRUCTIONS To properly use the device, carefully read this quick-start guide before using it. Instruction is based on factory default settings of the device. Images and screen capture in this guide may not exactly match those of the final product. Parts of the content may not exactly match the operation of the product owing to firmware updates of the device. This tablet is not liable for any performance problem or incompatibilities caused by the user’s editing of the assembly.
Trademarks Other trademarks and their copyrights are properties of their respective owners.
General views of f the dev vice Buttons and port ts ■ ■ ■ ■ ■ ■ Powe er Button Long g press th he power button 3 seconds s and wai it for de evice pow wer on. To switch it off, Pre ess and hold h down n the but tton and choose the “ √ ” option. To ac ctivate the t Sleep p mode, please p pr ress the power button. And press it again to o resume reading. . et hole Rese Reset the dev vice. micr roSD card slot Allows you to o insert a microS SD card and a acces ss the fi iles stor red on it.
GETTING START ■ Battery This device contains a rechargeable battery. To charge your device’s battery, use the micro USB cable which is included in your tablet package. ■ Power on / Power off Long press the Power button and wait for the device is on. To power off, press and hold till screen shows menu list of option and select it. To enter standby mode, slide the Power switch once more. Slide the switch again to continue the reading.
■ Insert / remove the microSD card To install the microSD card, insert it in the slot and press until it clicks into place. To remove the microSD card, press and remove it from the same slot. ■ Transferring files To transfer files between the tablet with computer, please follow the steps: 1. Connect the microUSB cable to the microUSB port of the tablet and insert the USB connector into a USB port of the computer.
TOUCH SCREEN Click or Long Press on the surface of the display with your fingertips or stylus to select a view element or menu. To read a book, go to the Library by click the Book icon. If you have already started to read a book and you want to continue reading it, press the thumbnail icon of book cover. Next, press the icon of the book. It will open at the first page, or at the page you were last on if you have already read the book.
GO TO A PAGE: Go directly to the page number selected. APPEARANCE Allows users to change the font and size in EPUB and PDF formats. You can also change the margins, line spacing, font and select the font to the publisher defaults in EPUB. SEARCH: Allows you to search for text in the book you are reading. When a e-book is open, long-press on a word to access the context menu for reading. Inside the menu you can: ■ Create note This option allows you to add new notes to which book you are reading.
Handwriting on a Note You can use the stylus to draw and write directly in an App “nNote”. Once device is power on the default home screen will be nNote App. All the exist notebook icon will show up for you to pick up for editing. Click the icon of any notebook, will open the file for your next command. User can write with the stylus (handwrite) while resting your hands on the touch display. To undo/redo handwriting, tap (Undo) or (Redo) on the top toolbar.
Wi-Fi CONNECTION To surf around the Internet you first need to connect the device to a Wi-Fi network, as follows: 1. Go to [Settings] > [Wi-Fi Settings]. Switch on Wi-Fi. 2. A list will appear, containing the names of the Wi-Fi networks (SSID) detected. Scroll down the list of available networks and press the name of the selected network. Enter the password and press Connect. The Wi-Fi icon and signal intensity indicator will appear in the upper bar.
3. SAFETY PRECAUTIONS To use the device safely, please observe the following safety precautions: ■ Do not use damaged power cords, connectors or loose sockets. ■ Do not touch the power cord with wet hands or pull on the cord to disconnect the charger. ■ Do not fold or damage the power cord. ■ Do not use the device while charging or touch it with wet hands. ■ Do not strike and drop the charger. ■ Do not charge the device with chargers that have not been approved by the manufacturer.
SAR Information This device’s maximum SAR value is well below the EU limits with specific measurements shown in the below table. Device Model ED0Q02 E60Q62 EU 10g SAR limit 2.0 (W/kg) (TBC) 2.0 (W/kg)(TBC) Highest Value 0.944(W/kg)(TBC) 0.944(W/kg)(TBC) Cleaning Before cleaning the device, power it off and disconnect from all systems and power cords. ■ Ensure that the device is completely dry before connecting the cords then turning it on.
■ Moisten the cloth with clean water, wring it well to clean the case then remove all leftover detergent.
(Electric and ele ectronic device waste) w (Applica able in the t Europ pean Union and in European n countri ies with selectiv ve waste collecti ion systems). This mar rking on the prod duct, accessories or liter rature in ndicates that the prod duct and its elec ctronic accessorie es (e.g. charger, , headset t, USB cabl le) shoul ld not be e disposed of with h other household h d waste at a the end of their t wor rking lif fe.
DECLARATION OF CONFORMITY E Reader Device complies with the provisions of Directive 2006/95/EC on the harmonisation of the laws of Member States relating to Electrical Equipment designed for use within certain voltage limits and Directive 2004/108/EC on Electromagnetic Compatibility complying with the harmonized standards: EN 60950-1:2006 + A11:2009+A1:2010+A12:2011+A2:2013, EN 301 489-1 V1.9.2, EN 301 489-17 V2.2.1, EN 300 328 V1.9.
Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Radiation Exposure Statement: The product comply with the FCC portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available. Note: The country code selection is for non-US model only and is not available to all US model.
Radiation Exposure Statement: The product comply with the Canada portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available.