E-Reader Device Model name: E60QP2 Thank you for choosing this E Reader Device. Before using your e-reader, carefully read this quick-start guide. Box contents: Before using your this Device for the first time, please check the content of the package. If any of the following items is not in the package, contact the retailer where you purchased the device.
INSTRUCTIONS To properly use the device, carefully read this quick-start guide before using it. Instructions are based on factory settings of the device. Images and screenshots in this guide may not exactly match those of the final product. Parts of the content may not exactly match the operation of the product owing to firmware updates of the device. This Device is not liable for any performance problems or incompatibilities caused by the user’s editing of the registry.
Trademarks Other Trademarks and their copyrights are property of their respective owners.
General views of the device Buttons and ports Power Button Long press the power button 3 seconds and wait for device power on. To switch it off, Press and hold down the button and choose the “ √ ” option. To activate the Sleep mode, please press the power button. And press it again to resume reading. Reset hole Reset the device. microSD card slot Allows you to insert a microSD card and access the files stored on it.
SET UP When you turn on your e-reader, you have to select your language, connect Wi-Fi and create an account to link your device (or use an already existing account). If you have registered before with other device, you can access by entering your e-mail address and password. If you have not registered before, you will need to create an account. You will be asked to provide an e-mail address, password and bank-card details (optional) for the Store.
GETTING STARTED Battery This device contains a rechargeable battery. To charge your device’s battery use the micro USB cable included with your EREADER Device. Switch on / switch off Long press the Power button and wait for the device is on. To switch off, Press and hold till screen shows “ √ ” option and select it. To enter stand-by mode, slide the switch once. Slide the switch again to continue the reading.
Insert / remove the microSD card To install the microSD card, insert it in the slot and press until it clicks into place. To remove the microSD card, press it to remove it from the slot. Transferring files To transfer files from your e-reader to a computer or vice versa, do the following: 1. Connect the microUSB cable to the microUSB port on your e-reader and insert the USB connector into the USB port on the computer.
TOUCH SCREEN Press the surface of the screen with your fingertips to select an element or menu. To read a book, go to the Library by pressing book icon. If you have already started to read a book and you want to continue reading it, press the icon. Next, press the icon of the book. It will open at the first page, or at the page you were last on if you have already started reading the book. To turn the page, slide the screen to right direction to go forward and the left direction side to go back.
GO TO A PAGE Go directly to the page number selected. APPEARANCE Allows change the size font in EPUB and PDF formats. You can also change the margins, line spacing, font and select the font to the publisher defaults in EPUB. SEARCH Allows you to search for text in the book you are reading. When a e-book is open, long-press on a word to access the context menu for reading. From here, you can: Create note This option allows you to add new notes to the book you are reading.
Wi-Fi CONNECTION To browse the Internet you first need to connect the device to a Wi-Fi network, as follows: 1. Go to Settings > Wi-Fi Settings. Switch on Wi-Fi. 2. A list will appear, containing the names of the Wi-Fi networks (SSID) detected. Scroll down the list of available networks and press the name of the selected network. Enter the password and press Connect. The Wi-Fi icon and signal intensity indicator will appear in the upper bar.
CTM Front lighting With two kinds of front lighting color: cold-white and warm-white. Users could set up the color temperature by software.
SAFETY PRECAUTIONS To use the device safely, please observe the following safety precautions: Do not use damaged power cords or connectors or loose sockets. Do not touch the power cord with wet hands or pull on the cord to disconnect the charger. Do not fold or damage the power cord. Do not use the device while charging or touch it with wet hands. Do not strike or drop the charger or battery. Do not charge the battery with chargers that have not been approved by the manufacturer.
Cleaning Before cleaning the device, turn it off and disconnect all the system and power cords. Ensure that the device is completely dry before connecting again the cords and turning it on. Do not use any cleaning liquids or sprays directly on the surface of the screen or the case. Use a soft, clean and lint-free cloth to remove dust and dirt from the screen. For fingerprints and stains, use a cloth with mild cleaning products.
(Electric and electronic device waste) (Applicable in the European Union and in European countries with selective waste collection systems). This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life.
DECLARATION OF CONFORMITY E Reader Device complies with the provisions of Directive 2014/53/EU on the harmonisation of the laws of Member States relating to Electrical Equipment designed for use within certain voltage limits and Directive 2014/53/EU on Electromagnetic Compatibility complying with the harmonized standards: EN 300 328 V2.1.1 (2016-11) EN 50566: 2013 + AC: 2014 EN 62209-2:2010 EN 301 489-1 V2.1.1 (2017-02) EN 301 489-17 V3.1.
Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Radiation Exposure Statement: The product comply with the FCC portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available. Note: The country code selection is for non‐US model only and is not available to all US model.
