DP-M04 Auto Focus eScope User Manual
Thank you for buying our professional digital microscope. To guarantee the product function into fully play and prolong service life, please read the user manual carefully before installations. And the product should be well clean and maintenance when using it. In line with the policy of continued development, if there are any amendments on the appearance, color or assemblies, please refer to the real object.
Warnings and Attentions Warnings Do not modify any accessories, or our company won't responsible for any malfunctions and calamities may cause. Do not put the product into fire, or our company won't responsible for any malfunctions and calamities may cause. Please follow the manual to operate the product, otherwise you have to bear all aftereffect. Attentions Always replace the lens cap to avoid dust and moisture when the device is not in use. Please stop using the product if any abnormal phenomena.
Specifications CMOS Sensor Image Sensor Video Capture Resolution Video Capture Format Still Image Capture Resolution Still Image Format Light Frequency Frame Rate Magnification Rate Shutter Speed White Balance Exposure Auto Focus Function Focus Fine Button Light Source PC Port Operated System AP Language Power Supply Size Weight 1/3〝 CMOS 2.0M 1600x1200, 1280x960, 800x600, 640x480 AVI 1600x1200, 1280x960, 800x600, 640x480 BMP, JPEG 50Hz / 60Hz 30fps@VGA 65X, 225X 1 sec. to 1/1000 sec.
3. Click ‘Next’ to install. 4. Click “finish” to complete the installation. 5. Now the “eScope ” shortcut Icon will show on the desktop automatically. Auto Focus eScope Hardware Installations After the software installation finish, connect Auto Focus eScope to computer by the USB port. Auto Focus eScope Operations To ensure the correct way in using the Auto Focus eScope, please follow below steps to operate. 1.
eScope Software Guide Execute Software Remark: Before executing the software, please make sure the Auto Focus eScope is connected to the PC. Double click the shortcut icon eScope on desktop, and then the real-time image will show up on screen. * Slide mouse to the short cut icons in the main manual bar to quickly know the uses. (Please refer to eScope software interface instruction for more details.) Capture Photo a. Click ‘Capture Picture ’ shortcut icon in the main menu bar. b.
Time-lapsed Picture / Video a. Click ‘Time-lapsed Photo/Video ’ shortcut icon in the main menu bar. b. Click ‘Capture > Time-lapsed photo/video F5’. c. Press the key F5 on keyboard. * A new dialogue box appears in which you can enter desired setting data. * Under Time-lapsed photo, you can set the start time, interval time and total picture number. * Under Time-lapsed video, you can set the start time, interval time and total video number.
Calibration and Measurement Please make calibration before measurement. Calibration Click on the shortcut icon or choose ‘Display crossing’ under ‘Setting’ option to display the crossing. It’s used to check the dial is parallel or not. 1. Focus eScope on the attached dial and then press on the AF button to adjust. Take a picture for the selected area when the dial is parallel to the crossing as below. 2. Double-click on the picture to enter into measurement interface as below. 3.
4. Click ‘OK’, the mouse will become a crossing on the screen. Click on the beginning and ending points across a known value (The default magnification rate and value will show up automatically). Now a dialog will popup as below and you need to enter the exact value of the measurement sample into the ‘Actual dimension’. Then the software will automatically calibrate the magnification rate. Click ‘OK’ and the adjusted magnification rate will show in the upper right corner..
Measurement Double-click on the picture to enter into measurement interface. Under the ‘Measurement’ icon , you can choose any desired options to measure. 1. Any Angle Line Measurement Simply click from one point and drag to the next point, and then click again to lock-in. 2. Straight Angle Line Measurement The Line measurement allows you to measure from one point to the next. Simply click and drag to the desired length, and then click again to lock-in. 3.
After clicking ‘Reset picture magnification’, the icon in the upper right corner is . 2. Change the magnification rate and capture several pictures, click on the picture to enter into measurement interface. And click ‘ > Set magnification > Set picture magnification’, now a dialog will show up as below, enter the magnification rate into the dialog and click ‘OK’. 3. If you want to use the same magnification rate to capture pictures, just click ‘ > Set magnification > Set capture magnification’.
2. Click icon and set the font for the text in the popup dialogue as below. 3. You can add any text on the picture after setting. eScope Software Interface Instructions Main Interface Options instructions File Option Under ‘File’ option, there are select saving folder, open, delete, copy image, copy file, save as, photo save as display and exit. Select saving folder --- Set the stored path for all the pictures and videos. Open --- Open the selected picture and video.
Capture Option Under ‘Capture’ option, the functions of photo (F4), video (F8) and time-lapsed photo / video (F5) are the same as the shortcut icons of in the main menu bar. Help Option Under ‘Help’ option, there are method, eScope update and about. Click the method into the eScope software instructions. And click eScope update to enter www.oi.com.hk/download to download the latest software.
Picture and Video Saving On the left side of the main interface, there are two folders for saving picture and video. All the pictures and videos will save into the folders automatically after capture and show in thumbnails. The picture or video won’t be deleted after closing the software. We suggest save the important picture or video to other assigned folder and delete the useless picture and video.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC NOTE： THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
