Wireless network adapter Quick Installation Guide Wireless network adapter Quick Installation Guide Page 1 of 13
Wireless network adapter Quick Installation Guide 1 About This Guide This Quick Installation Guide only provides you some basic instructions. For more detailed information, please refer to the User Manual. Before you begin, you must have at least the following: z A notebook /desktop pc with an available 32-bit Cardbus/PCI/USB slot z At least a 300MHz processor and 32MB of memory z Cardbus/PCI/USB controller properly installed and working in the computer z An 802.11g or 802.
Wireless network adapter Quick Installation Guide z Click Install Driver & Utility for Cardbus/PCI Wireless Adapter ( if your wireless adapter is USB wireless adapter, please select Install Driver & Utility for USB Wireless Adapter )on the Wireless Client Configuration Utility screen, and then select the installing language from the next screen.
Wireless network adapter Quick Installation Guide Figure 2-3 z Figure 2-4 Follow the Install Shield Wizard steps, and click Finish when done.
Wireless network adapter Quick Installation Guide 3 Install Wireless adapter 3.1 Cardbus Adapter z z z Power on your notebook, let the operating system boot up completely, and log in as needed. Hold the adapter with the LOGO facing up and insert it into a Cardbus slot. Figure 3-1 If the Found New Hardware Wizard displays, choose install the software automatically (Recommended), and click Next button. The driver will be installed automatically.
Wireless network adapter Quick Installation Guide Figure 3-2 3.2 PCI Adapter z z z z Open your PC case and locate an available PCI on the motherboard. Slide the PCI Adapter into the PCI slot. Make sure that all of its pins are touching the slot’s contacts. You may have to apply a bit of pressure to slide the adapter all the way in. after the adapter is firmly in place, secure its fastening tab to your PC’s chassis with a mounting screw. Then close your PC.
Wireless network adapter Quick Installation Guide automatically (Recommended), and click Next button. The driver will be installed automatically. Figure 3-4 3.3 USB Adapter z z Power on your PC, let the operating system boot up completely, and log in as needed. Hold the adapter and insert it into a USB slot. z Figure 3-5 If the Found New Hardware Wizard displays, choose install the software automatically (Recommended), and click Next button.
Wireless network adapter Quick Installation Guide automatically. Figure 3-6 You have now completed the driver and hardware installation for the Adapter. 4 Configuration your wireless adapter z The Wireless Client Configuration Utility screen will appear automatically.
Wireless network adapter Quick Installation Guide Figure 4-1 z Click the Set Wizard(S) tab to start connecting to Wireless-AP.
Wireless network adapter Quick Installation Guide z Select Station(infrastructure), click Next Figure 4-3 z To connect to one of the networks on the list, select the wireless network and click Next Figure 4-4 Page 10 of 13
Wireless network adapter Quick Installation Guide z Click OK (if the wireless network have network key, you should import the network key, please refer to Wireless network adapter -UM) Figure 4-5 z Select Obtain an IP address automatically, Obtain DNS server address automatically, and then Click Finish to complete configuration.
Wireless network adapter Quick Installation Guide Figure 4-6 Congratulations! You’ve successfully configured your wireless adapter! Page 12 of 13
Wireless network adapter Quick Installation Guide FCC statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
