Wireless N ADSL2+ Modem Router Quick Installation Guide 1. Hardware Installation Step 1: Connect the ADSL Line. Method one: Plug one end of the twisted-pair ADSL cable into the ADSL LINE port on the rear panel of the modem router, and insert the other end into the wall socket. Method two: You can use a separate splitter.
Wireless N ADSL2+ Modem Router Quick Installation Guide Name PWR ADSL Status On Off Flash On Off Flashing On Internet Off WLAN Flash On WPS Off Off Flash Indication Power is on Power is off The ADSL negotiation is in progress The LINE port is linked up. The LINE port is linked down. Data is being transferred over the Internet. The modem router is initializing in the first 10 seconds when power is up. Or a successful PPP connection has been built.
Wireless N ADSL2+ Modem Router Quick Installation Guide LAN(1-4) Flash On Off Data is being transferred over the 1-4 (LAN) port. There is a successful connection on corresponding 1-4 (LAN) port but activity. There is no connection on corresponding 1-4 (LAN) port or connection is abnormal. the no the the 2. Configure PC For Windows 7 as an example, other OS refer to set up. Step 1: Click , then select the Open Network and Sharing Center. Step 2: Click the Change adapter settings.
Wireless N ADSL2+ Modem Router Quick Installation Guide Step 3: Click Local Area Connection with the right button of your mouse. Then select Properties. Step 4: Double click the “Internet Protocol Version 4(TCP/IPv4)”.
Wireless N ADSL2+ Modem Router Quick Installation Guide Step 5: Select the “Obtain an IP address automatically” as below. Then click “OK”. 3. Login and Quick Start Step 1:Start your web browser and type the private IP address of the modem router in the URL field: 192.168.1.1. Then,enter the default User Name guest and the default Password guest, then click Login.
Wireless N ADSL2+ Modem Router Quick Installation Guide Step 2: And then Click START to start Quick Start guide. Step 3: The Wizard will guide you through these four quick steps. Begin by clicking on NEXT Step 4: Click Cancel if you know the correct PVC(VPI/VCI) from your ISP, you can input the value manually. And if you don’t know the correct value, please click OK , it will take a moment to search for the available PVC.
Wireless N ADSL2+ Modem Router Quick Installation Guide Step 5: After the PVC value be input or searched, please click NEXT. Step 6: Select the Internet connection type to connect to your ISP, click NEXT to continue. We will take PPPoE/PPPoA for example throughout this Guide. (For most DSL user) Step 7: Enter the PPPoE/PPPoA information provided to you by your ISP, click NEXT to continue.
Wireless N ADSL2+ Modem Router Quick Installation Guide Step 8: You may enable/disable Wireless, change the wireless SSID and authentication type in this page, then click NEXT to continue. Note: The default SSID and Password are “netis” and “password”. Step 9: Click NEXT to save the current settings, then click CLOSE to finish the Quick Start.
Wireless N ADSL2+ Modem Router Quick Installation Guide Step 10: Click , then select the SSID you have set on Step 8, and click “Connect” button. Step 11: On the pop-up page, input your password which you have set on Step 8 and click OK.
Wireless N ADSL2+ Modem Router Quick Installation Guide Step 12: Click , it will show like below, then you can surf the Internet. Appendix: Configure the parameters for the WAN interface of your modem router Step 1: Connect your upper device with the LAN4 port (as WAN port) on the router by an Ethernet cable. And connect your PC with one of LAN1~LAN3 port by an Ethernet cable.
Wireless N ADSL2+ Modem Router Quick Installation Guide Step 3: After Reboot, you can continue to configure in the following page.
Wireless N ADSL2+ Modem Router Quick Installation Guide Certification FCC CE FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-vide reasonable protection against harmful interference in a residential installation.
Wireless N ADSL2+ Modem Router Quick Installation Guide subject to following two conditions: 1) This device may not cause harmful interference 2) This device must accept any interference received, including. Interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.