Universal Push2TV HD Adapter (PTVU1000) User Manual 350 East Plumeria Drive San Jose, CA 95134 USA August 2011 202-10839-01 v1.
Universal Push2TV HD Adapter © 2011 NETGEAR, Inc. All rights reserved No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means without the written permission of NETGEAR, Inc. Technical Support Thank you for choosing NETGEAR.
Contents Chapter 1 Setup and System Initialization Minimum System Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 What’s in the Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Software Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Before You Install . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Setting Up the Adapter . . . . . . . .
Push2TV HD Adapter Chapter 2 Wireless Connectivity Wireless Icon Is Gray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Wireless Icon Is Red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Channel Busy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Movie Playing Is Disrupted. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Link Quality Indication . . . . .
Push2TV HD Adapter Chapter 4 Audio No Audio in HDMI Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66 Audio Disappears After Link Disconnection . . . . . . . . . . . . . . . . . . . . . . . .67 Audio Does Not Switch to TV or Screen. . . . . . . . . . . . . . . . . . . . . . . . . . .67 Setting Audio Output Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67 Video and Audio Synchronization. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.
Push2TV HD Adapter • System configurations that include more than one graphic card are currently not supported. • Surround audio is supported through HDMI or optical S/PDIF input to home theater or speaker system. For Windows XP: • For office use, web browsing, and so on: 1.6 GHz Atom or Celeron processor and 512 MB memory. • For 720p / full screen video: 1.8 GHz Core2 Duo processor and 1 GB memory. • For 1080p / full screen video: 2.4 GHz Core2 Duo processor and 2 GB memory.
Push2TV HD Adapter Software Installation Before You Install Before you install the software, be aware of the following: • If your PC contains a previous Universal Push2TV HD Suite driver installation, be sure to perform a correct uninstall procedure using the Windows Control Panel. • The installation software requires .NET Framework version 2.0 (or later) to be installed on the computer. If this software is not installed, you can download it from the following location: http://www.microsoft.
Push2TV HD Adapter The installation CD Autoplay menu displays. 3. Select Install Universal Push2TV HD Software. 4. The Install Wizard begins installing the Universal Push2TV HD software. The installation process can include more than one step to accommodate several drivers that are installed.
Push2TV HD Adapter 5. Select your geographic region to comply with your local radio regulations. This setting can be changed, if needed, once the software is installed. 6. Follow the on-screen instructions, and click Next> when prompted, or by approving authorization requests to continue the installation.
Push2TV HD Adapter 7. Once the audio driver and application driver are installed, the following message displays: 8. When the installation procedure has successfully finished, you are automatically returned to the opening screen of the AutoRun menu. You might be requested to reboot. Setting Up the Adapter Connect the HD Base 1.
Push2TV HD Adapter The Display and Audio icons also display as soon as a connection is established. Note the following: • If you do not see the icon changing to green, verify the line of sight between the adapters. • If you do not see the Display icon, refer to Chapter 3, Video, or try the suggestions in Service Activation on page 35.
Push2TV HD Adapter Note: The audio output is activated automatically. If you need to set the audio output device manually, see Setting Audio Output Device on page 67. Positioning the PC Adapter To achieve best performance, NETGEAR recommends that you position the PC Adapter in the upright position.
Push2TV HD Adapter Vertical mounting: The Base is fastened to a wall or a projector, or behind a display screen, and the TV Adapter is connected so that it is flat with the mounting surface, with the TV Adapter pointing upwards. IMPORTANT: Leave the top side of the TV Adapter unmasked for best radio performance: Note: For best performance, NETGEAR recommends that you always position the TV Adapter vertically so that it is pointing upwards.
Push2TV HD Adapter The color and shape of the icon indicates the current activity state, as shown in the following table: Icon Color Status Host Hardware Disconnected (gray icon) Universal Push2TV PC Adapter is not connected. Host Hardware Enabled (red icon) Universal Push2TV PC Adapter is connected to the PC (PC Adapter is enabled), but wireless connection is not active. Connected (green icon) A wireless connection is established with a Universal Push2TV TV Adapter.
Push2TV HD Adapter Traffic: • Rapid flashing when data is received or transmitted. Universal Push2TV HD Manager Context Menu Options Accessing the Universal Push2TV HD Manager To access the Universal Push2TV HD Manager, right-click the Universal Push2TV HD and select Universal Push2TV HD Connections to display Manager System Tray icon the Universal Push2TV HD Manager screen.
Push2TV HD Adapter Context menu options Menu option Description Universal Push2TV HD Manager Displays the main user interface, which displays a list of Universal Push2TV HD devices that are available, and their connection status (Connected, Not Connected, Blocked) Optimize Performance Reducing the output resolution has been found to be a good solution for improving performance on weak platforms as it requires much less processing power from your platform.
Push2TV HD Adapter Universal Push2TV HD Manager Options Universal Push2TV HD Manager Options Menu option Description Push2TV Adapter MAC Address Displays the currently connected PC Adapter MAC address.
Push2TV HD Adapter PC Adapter Names Changing PC Adapter Names in the Universal Push2TV HD Manager The Universal Push2TV HD Manager screen allows you to modify the name of the PC adapter that displays in the connections list. To modify the PC adapter name: 1. Double-click the PC adapter name. 2. Enter the text that you want. 3. Click anywhere outside of the device name area to finalize.
Push2TV HD Adapter Advanced Settings The Universal Push2TV HD Manager’s Advanced Settings screen allows the configuration of the Channel and Region selection in the host. To access the Advanced Settings screen: In the Universal Push2TV HD Manager screen, click Advanced Settings. Option Description Region Allows selecting the regulatory region: USA, Europe. Current Channel (read only) Displays the current radio channel.
Push2TV HD Adapter Blocking or Disassociating Blocking or Disassociating a Device The Universal Push2TV HD Manager screen allows you to remove devices or to temporarily disable them from connecting to the PC Adapter. To block a device temporarily, and prevent it from connecting to the PC Adapter, right-click the device name in the Connection list, and select Block Device.
Push2TV HD Adapter Context Menu Options Menu Option Description Block/UnBlock Device Allows you to temporarily disable a device from connecting with the PC Adapter. Disassociate Device Removes the device from the list. To return the device to the list, pairing must be performed. Rename Allows you to change the device name as it appears on the Universal Push2TV HD Manager. Properties Displays the properties screen for this device.
Push2TV HD Adapter Using Mirror Mode Mirror mode is used to display the identical content on the additional screen as is shown on the main PC or laptop screen. Mirror mode is generally used to display the PC contents on a larger or higher-definition display. In Mirror mode, the default resolution is chosen based on the common denominator between the PC and the additional screen—therefore, for most PCs, 1080p is not supported. Note: Mirror mode is not recommended for playing HD video.
Push2TV HD Adapter Note: Extend mode is recommended for playing HD video as Mirror mode is limited by the resolutions supported in the PC.
Push2TV HD Adapter Configure Screen Options in Windows 7 When a link is established with the Universal Push2TV HD TV adapter, the Display drivers appears in the Windows system tray. The right-click are activated and the Display icon context menu of the Display icon contains configuration options that correspond to the display mode. To configure screen resolution, or any other display option, select Advanced.
Push2TV HD Adapter Configuring the Display in Windows XP or Vista Configuring the Display via the Display Icon Context Menu Icon Context Menu in Windows XP or Vista When a link is established with the Universal Push2TV HD TV adapter, the Display drivers are activated, and the Display icon appears in the Windows system tray. The right-click context menu of the Display icon contains configuration options that correspond to the display mode.
Push2TV HD Adapter Screen Rotation: This option allows you to rotate or flip the monitor. It is applicable in both Mirror and Extend modes. Extend To: This option allows you to select the direction the monitor will extend to. Extend: Select Extend mode. Mirror: Select Mirror mode. Off: Disable the remote display. Advanced: With this option, you open the Windows Display Settings screen and can select all display options from there.
Push2TV HD Adapter • The resolution, color depth, and refresh rate of the primary screen are duplicated on the display connected to the HD Base. • If the display connected to the HD Base supports a lower resolution than the primary display, the primary graphics device will have its resolution changed automatically to ensure that the whole picture fits on the additional display screen.
Push2TV HD Adapter To place an application window in the extended space, use the following tips: • Reduce the application window size to about half the normal size, and then drag the application window (dragging by the title bar at the top of the screen) past the edge of your main display and into the extended display space. Resize the window in the extended space as needed for comfortable viewing.
Push2TV HD Adapter Adjusting Screen Resolution Use the Resolution slider to adjust the desired resolution of the display (see circle 2 in the previous figure). Adjusting Color Level Use the Colors drop-down list to select a color complexity level (see circle 3 in the previous figure). Setting the Universal Push2TV HD TV Adapter as the Primary Display To make the Universal Push2TV HD TV adapter the primary display: 1.
Push2TV HD Adapter Supported Resolutions Problem/Question: I have a full HD TV, but I cannot set the screen resolution on it to 1920 x 1080, which is the native resolution of this TV. Answer: The maximum screen resolution supported by the product is 1080p (1920 x 1080). However, in Mirror mode you are limited by the maximum resolution of your PC. Therefore, you need to change the mode to Extend mode, as described in Configuring the Display on page 22.
Push2TV HD Adapter Driver Information Verifying that the drivers are installed and functional. Device Manager Viewing the Drivers in the Device Manager To view the drivers in the Device Manager, right-click My Computer and select Manage. In windows XP: In Windows 7: 1. Select Device Manager. 2. Select View > Devices by connection.
Push2TV HD Adapter Under PCI bus, open USB devices.
Push2TV HD Adapter To repair this, right-click and select Update drivers, or uninstall, detach, and reattach the PC Adapter. Verifying WUSB Drivers Installation Viewing the Drivers in the Installed Directory Open C:\Windows\System32\Drivers, and look to see that the following files are there: • WSR_CBA.SYS • WSR_DWA.SYS • WSR_HWA.SYS • WSR_RCI.SYS • WSR_TBF.SYS • WSR_USF.SYS If any of the drivers are missing, uninstall and reinstall the Universal Push2TV HD drivers.
Push2TV HD Adapter Uninstalling Drivers You can select Uninstall on the Device Manager as explained earlier. To completely remove the driver installation: • In Windows XP: Start > Control Panel > Add or remove programs. • In Windows 7: Start > Control Panel > Programs > Programs and Features. Select the Universal Push2TV HD application, and uninstall it.
Push2TV HD Adapter Viewing the Device’s Vendor ID and Product ID Select the device in the Device Manager: Right-click and select Properties: 36
Push2TV HD Adapter Select the Details tab and select Hardware IDs in the drop-down list: In the previous example: VID: 13CF PID: 1200 37
2. Wireless Connectivity 2 This chapter describes common behaviors of your Universal Push2TV HD Adapter, and provides advice and solutions. Wireless Icon Is Gray Problem/Question: The PC Adapter is attached to the PC, but I see the Gray icon in the System Tray. Symptom: (Gray) icon in the System Tray. The host PC displays the Disconnected Solution: • Detach and re-attach the PC Adapter.
Push2TV HD Adapter If either of the following happens, try the steps that follow: • Green System Tray icon established. • The Device is not listed in the Universal Push2TV HD Manager screen. does not light up to indicate that a connection has been Power is not applied to the Device: Make sure that the appropriate power supply is connected to the power supply connector on the device side. TV Adapter requires restart: Detach and re-attach the TV Adapter from the Display Adapter to restart the hardware.
Push2TV HD Adapter Movie Playing Is Disrupted Problem/Question: Movie playing is disrupted by moving the laptop. Symptom: Movie-playing performance is degraded when the laptop PC is moved around. Solution: Some laptop models offer an active hard disk protection feature that locks the hard disk when motion is detected by the laptop. This might cause movie playing to be disrupted when the laptop is moved. Disable or lower the sensitivity of the active hard disk protection mechanism.
Push2TV HD Adapter Solution: The following table shows the different states of the Connection Status icon, which indicates the connection quality: State Icon Description Blocked The device was blocked by the user and not connected to the PC. Not connected The device is associated with the PC, but out of range. Connected The device is connected with good link conditions, but no data is being transferred over the Universal Push2TV HD link.
Push2TV HD Adapter Pairing Problems with Pairing Problem/Question: I’m having problems with Pairing. Symptom: The Pairing procedure does not result in the confirmation “Universal Push2TV HD device has been paired,” or it results in an error message. Solution: Try the following: • Detach and re-attach the TV Adapter. • Re-attach PC Adapter, and then attach TV Adapter. • Detach all Adapters, restart the PC, and try Pairing again.
Push2TV HD Adapter Multiple Hosts Problem/Question: I’m having problems pairing with multiple hosts—each pairing must correspond to a specific PC Adapter (host). Symptom: If more than a single PC Adapter (Host) has been attached to the PC at any time, the pairing process requires that at least one PC Adapter be connected while the TV Adapter is being paired. Solution: Make sure that a single PC Adapter is attached to the PC, and then re-attach the TV Adapter to perform pairing.
3.
Push2TV HD Adapter General Troubleshooting Minor issues can generally be resolved by any of the following: • Detaching and re-attaching the power from the HD base • Changing the display mode through the DisplayLink GUI • Changing the display mode through Windows Display Properties On Windows 7 or Windows Vista WDDM (Aero and Basic), DisplayLink software works closely with the graphics card, and there might be interoperability issues with some graphics cards. If this happens: 1.
Push2TV HD Adapter 1. For surround audio to work correctly, click the Configure PowerDVD settings button (marked in the following figure). 2. Select audio options in the left side of the window, and Use S/PDIF in the Speaker environment area.
Push2TV HD Adapter 3. Click OK to complete the configuration process. Recommended Codec Pack For best performance when playing various video and audio formats, you should install an updated set of Codecs in the system. The following set of Codecs has been tested and is known to give good video performance: • CCCP Codec Pack available from http://cccp-project.net/. QuickTime Player with the Display Adapter Problem/Question: Video does not play correctly on Apple’s QuickTime Player.
Push2TV HD Adapter WinAmp Application Does Not Return to PC Screen Problem/Question: I am using WinAmp, and when I change from Extended mode to Mirror mode, WinAmp is not being transferred to the PC screen and is not accessible. Solution: You should first drag the WinAmp application to the main display before switching to Mirror mode. VLC Player Does Not Show Properly Problem/Question: I am using a VLC player in Windows XP, and there is distorted color and sound when I am working in Mirror mode.
Push2TV HD Adapter Optimizing Internet Video Internet Video Optimizing Internet Video Viewing Many video content websites use an embedded Adobe Flash player to show video content. In some cases to achieve best performance with the Flash player (for example, when viewing online video content in full screen mode), adjust the Flash Player settings as follows: To optimize the Flash player: 1. Right-click the video content on the website, and select Settings from the Adobe Flash Player context menu. 2.
Push2TV HD Adapter Online Movies Freeze Problem/Question: Online movies freeze in full screen mode. Symptom: The movie freezes when going to full screen mode on websites that use an embedded Adobe Flash player. Solution: In the Adobe Flash Player Settings screen, clear the Enable hardware acceleration check box. See additional suggestions in Internet Video on page 49 and Aero Desktop Theme on page 55.
Push2TV HD Adapter Select the DisplayLink display card: Select Advanced > Troubleshoot, and disable the hardware accelerator: 51
Push2TV HD Adapter Another option is to right-click the Video screen, select Settings, and clear the Enable hardware acceleration check box: Flash Player Is Not Showing in Full Screen Problem/Question: I am watching a movie with Flash Player, like YouTube, in full screen. When I click the mouse, the screen changes back to a smaller screen. Answer: When you are running Flash Player in one screen and you click the mouse in another window, the Flash Player returns to normal screen display mode.
Push2TV HD Adapter Surfing the Internet Using Wi-Fi Problem/Question: Can I simultaneously surf the Internet using Wi-Fi and view it wirelessly on my HD TV using the Universal Push2TV HD Adapter, for a complete wireless Internet display on my TV? Answer: Yes, you can. Using the home or office Wi-Fi network and the Universal Push2TV HD Adapter simultaneously is possible without any degradation of the network speed or the video quality.
Push2TV HD Adapter Solution: In some cases, the operating system is adjusting the CPU clock to a lower performance mode while the PC is battery operated. It is possible to detect this by viewing the system parameters of the PC: Right-click My computer, and select Properties. If the CPU speed is reduced from its AC power operation performance, set the PC to operate in maximum performance mode. This setting might change from one PC model to another.
Push2TV HD Adapter Right-click the Display icon , and select Optimize for Video. Note: As this mode is optimized for video watching, quality of text might be degraded. Aero Desktop Theme Setting Aero Desktop Theme in Win7 When you use the Universal Push2TV HD Adapter with the Windows 7 operating platform, NETGEAR recommends that you use the Aero desktop theme. Other desktop themes will result in poor video performance. To set the desktop to the Aero theme in Windows 7: 1.
Push2TV HD Adapter 2. In the Control Panel > Personalization screen, select Windows Color and Appearance. 3. Select Windows Aero (or other) from the Color scheme list, and click OK to save the new setting. HDMI Display Size on TV Problem/Question: • I am connected to my TV in HDMI mode, and the picture on the TV is too big (only part of my laptop screen is showing). • I am connected to my TV in HDMI mode, and the picture on the TV is too small (black areas are seen around the picture).
Push2TV HD Adapter • When using Extend mode, change the resolution using Display Link Manager. For more information, see Configuring the Display on page 22. • Download the latest Display Link driver. Picture Is Distorted When the Mouse Is Moving Problem/Question: I am changing from Extend mode to Mirror mode during movie play, and there is a paint effect on the movie window—the picture is frozen, and is updated only where the mouse is moving. Answer: Close and restart the media player.
Push2TV HD Adapter Solution: • Detach and re-attach the power supply of the Base Adapter. • Detach and re-attach the PC Adapter to restart the adapter hardware. • Reset the PC, and try again to establish the wireless connection to the HD Base. • Installation was not completed successfully. Uninstall both wireless and DisplayLink drivers and reinstall. • See also Service Activation on page 35. Remote Display Appears Unstable Problem/Question: My remote display appears slightly shaky.
Push2TV HD Adapter Select monitor and adjust the refresh rate: External Display Is Not Activated Problem/Question: The External Display is not activated. Symptom: No image is displayed by the remote screen (external display). Solution: Check to see that the video cable between the HD Base and the display screen is connected correctly and securely. Make sure that you have selected the correct input source in the display screen or TV controls (for example, HDMI, Line In, and Digital Input).
Push2TV HD Adapter Video Is Not Playing Smoothly Problem/Question: I see dropped frames and/or audio/video disconnects during movie play. Answer: There are several things that can cause this: • Your PC might not be powerful enough (the CPU usage seen in the Task Manager tool is 80-100%). See Minimum System Requirements on page 6. • Changing screen resolution to 720p (instead of 1080p). Select 1280×720, as described in Configuring the Display on page 22.
Push2TV HD Adapter laptop onto your HD TV, while you can continue working on your documents, emails, and Facebook account displayed on the laptop screen. Using Extend Mode Problem/Question: How do I use my system in Extend mode, and how do I set the wireless system to operate as an extension or additional screen or display to the PC? Instructions: Use Extend mode to display different content on each display screen.
Push2TV HD Adapter Note: When you are changing settings, or during first connection between the PC Adapter and Base Adapter, the PC display might flicker or turn on and off as the screen resolution is automatically adjusted. Detailed instructions on how to set your PC to work in Extend mode are in Configuring the Display on page 22.
Push2TV HD Adapter You can change the screen resolution, currently set to 1024 x 768: Display Issues on TV Problem/Question: • I am connected to my TV in HDMI mode, and the picture on the TV is too big (only part of my laptop screen is showing). • I am connected to my TV in HDMI mode, and the picture on the TV is too small (black areas are seen around the picture).
Push2TV HD Adapter Display Is Flipped Problem/Question: I am connected to my TV in HDMI mode. I can get a correct display and sound if I use the Extend display option in the Windows 7 Screen Resolution window, but if I try to display the whole desktop on the TV using “show desktop on 2,” the display is upside down. Answer: You might have selected Landscape (flipped) in the Screen Resolution window.
Push2TV HD Adapter Symptom: When you play a video, the audio part of the playback might not be synchronized with the video playback. Solution: Change the active power plan to Always On, Balanced, or High Performance. Windows XP: Click Start, select Control Panel. Click Power Options. Under Power Schemes, select Always On. Windows Vista: Click Start, type power in the Start Search box, and then click Power Options in the Programs list. Under Select a power plan, click Balanced or click High performance.
4. Audio 4 This chapter describes the following topics: • No Audio in HDMI Connection • Audio Disappears After Link Disconnection • Audio Does Not Switch to TV or Screen • Setting Audio Output Device • Video and Audio Synchronization • Audio Control Using the PC Buttons No Audio in HDMI Connection Problem/Question: No audio on the remote TV. Symptom: The system is connected and a movie is playing, but no sound is coming out of the TV speakers. Solution: 1.
Push2TV HD Adapter Audio Disappears After Link Disconnection Problem/Question: Audio does not recover after the link disconnects and reconnects. Symptom: I am watching a movie or a YouTube clip, and suddenly there is a disconnect/reconnect, after which the sound does not come back to the TV. Solution: This can happen (mostly in Vista) because after the movie has started, most video players do not transfer the audio back to the USB audio device after the reconnect.
Push2TV HD Adapter In Windows XP: 1. Right-click the Volume icon in the System Tray and select Adjust Audio Properties. 2. In the Sounds and Audio Devices Properties screen, click the Audio tab. 3. Under Sound Playback, in the Default Device drop-down list, select USB PnP Sound Device. 4. Click OK to save the new setting. In Windows Vista/Win7: Right-click the Audio icon in the System Tray devices.
Push2TV HD Adapter If using HDMI or S/PDIF (Digital output): Click Digital Output USB PnP Sound Device, and click Set Default. If using 3.5 mm jack (Analog output): Click Speakers USB PnP Sound Device, and click Set Default.
Push2TV HD Adapter Video and Audio Synchronization Problem/Question: Audio is not synchronized with the video. Symptom: When you play a video, the audio part of the playback might not be synchronized with the video playback. Solution: Change the active power plan to Always On, Balanced, or High Performance. Windows XP: Click Start, and select Control Panel. Click Power Options. Under Power Schemes, select Always On.
Push2TV HD Adapter Audio Control Using the PC Buttons Problem/Question: The volume control works only on the TV remote control or on the Audio receiver and not on the laptop buttons. Answer: • For stereo audio, it is a known Microsoft operating system bug that on some PCs certain volume buttons do not work for USB Audio devices. On some of them, the mute works but the volume control does not.
5. Miscellaneous 5 This chapter describes the following topics: • PowerPoint in Extend Mode • Power Saving Modes and Screen Saver • Built-In Laptop Screen Remains Black • PC and TV Adapters Are Warm PowerPoint in Extend Mode Problem/Question: Slide show is displayed on the main monitor only. Solution: This is a PowerPoint configuration feature.
Push2TV HD Adapter Power Saving Modes and Screen Saver Problem/Question: When I exit from screen saver mode, I notice strange effects on the remote display. Solution: Sometimes it is necessary to detach and reattach the PC Adapter after exiting the screen saver. Problem/Question: When my computer enters screen saver mode, I notice some flickering or decreased graphics performance. Solution: That is a known issue when screen saver mode is using 3D figures.
Push2TV HD Adapter PC and TV Adapters Are Warm Problem/Question: Using the system, the PC and TV Adapters get extremely hot. Solution: This is known and normal. The system was tested for hours in extreme conditions and continues to operate normally although the two adapters seem to be warming.
Push2TV HD Adapter 75
Index A Built-in laptop screen Black 73, 74 Close 73, 74 Lid 73, 74 Screen 73, 74 Advanced settings 20 Advanced Settings screen 20 Channel 20 Not active 20 PHY 20 Region 20 Wireless USB Manager 20 Aero desktop 55 Personalize 55 Setting 55 Windows color and appearance 55 Audio AV kit laptop dongle 67 Connected 67 disappears after link disconnection 67 does not recover after link disconnects and reconnects 67 does not switch to TV or screen 67 disconnect/reconnect 67 Movie 67 PC dongle 67 re-establish 67 re
Push2TV HD Adapter Procedures 22 Properties 29 Rebooted 29 Resize 26 Restart 26 Right-click context menu 26 Selecting the Correct Display Monitor 29 Setting the A/V Adapter as the Primary Display 29 Setting the Display to Extend or Mirror Mode 29 System Tray 26 using the Display Icon Context menu in Windows XP/Vista 26 using Windows Display Properties in Windows XP/Vista 29 when closing the lid 24 Windows system tray 26 Windows Vista 29 Windows XP/Vista 22 Work modes 22 Context menu options Browser 16 Conn
Push2TV HD Adapter Host Hardware Disconnected 14 Host Hardware Enabled 14 Wireless USB Channel is Busy 14 Wireless USB Channel is not available 14 Wireless USB Manager 14 Wireless USB Manager System Tray Icon 14 Install 11 No audio 66 No audio on the rempote TV 66 Win 7 66 XP 66 No Display icon Detach 57 Display icon 57 Displaylink drivers 57 Picture disappeared 57 Power supply 57 Reset 57 System Tray 57 L laptop, working with the lid closed 24 LED indication Connected 15 Flashing 15 Green 15 LED 15 Stat
Push2TV HD Adapter Flickering 73 Screen saver 73 Problems with Pairing Detach and re-attach Device Adapter 42 WIRELESS USB device has been paired 42 Problems with Pairing with multiple Hosts Correspond 43 Device Adapter 43 Single PC Adapter 43 Restart 35 Start 35 Setting Audio Output Device 67 Adjust Volume Properties 67 Connected A/V Adapter C- Media audio device 67 Playback 67 Volume icon 67 Windows XP 67 Setting options for display configuration 22 Setting up the Adapter A/V Adapter 11 Connect the AV A
Push2TV HD Adapter U Viewing the device's vendor ID and product ID 36 Details tab 37 Device manager 36 Hardware IDs 36 VLC player 48 Downloaded the latest version 48 Extend mode 48 Restart 48 Uninstalling Drivers 35 Cleanup Tool 35 Device manager 35 Disconnects 35 Driver 35 In Windows 7 35 In Windows XP 35 Remove 35 Uninstall 35 Windows start menu 35 Update 11 Using Skype Corrupted picture while playing video on the internet 57 Corruption 57 Disable HW accelarator 57 Extend mode 57 Latest version of Skyp
