Installation Guide

)NSTALLATION'UIDE
Digital Entertainer Elite EVA9000/9150
Start Here
This guide explains how to install the Digital Entertainer Elite using the basic setup; wired
Ethernet LAN; and video cable and audio cable included in the package, HDMI, or
SCART.
For wireless setup, custom setup, or component video connections, a User Manual is
provided on your NETGEAR Resource CD, or download the latest documentation at http:/
/www.NETGEAR.com/support.
Install your Digital Entertainer Elite in this order:
1. Connect the Digital Entertainer Elite.
2. Set up the Digital Entertainer Elite.
3. Install software on your computer with the NETGEAR Resource CD.
4. Configure your media library to work with the Digital Entertainer Elite.
Connecting the Digital Entertainer Elite
The figure below shows the rear view of the Digital Entertainer Elite EVA9000/9150.
To connect the Digital Entertainer Elite:
1. Connect the Digital Entertainer Elite to your TV set and audio equipment. If you use a
digital audio/visual (a/v) receiver, use an S/PDIF coaxial or optical cable to connect it.
2. Connect the Digital Entertainer Elite to the router with an Ethernet cable.
Pr
Pb
Y
Component Video
N10947
FCC ID: PY306400058
IC ID: 4054A-06400058
SERIAL
MAC
(wired)
MAC
(wireless)
50-60Hz, 1.2A max.
100-240V
Power
Reset
Link/ACTSpeed
Ethe
r
net
USB
S/PDIF Optical
LR
Audi o
Out
Composite Video
S/PDIF
Coaxial
HDMI
Scart
Di
g
ital E
ntertainer Elite EVA9 00 0
U.S. Patent Nos. 4,631,603; 4,819,098; 4,907,093; 5,315,448; and 6,516,132
S-Video
Pr
Pb
Y
Component Video
N10947
FCC ID: PY306400058
IC ID: 4054A-06400058
SERIAL
MAC
(wired)
MAC
(wireless)
50-60Hz, 1.2A max.
100-240V
Power
Reset
Link/ACTSpeed
Ethe
r
net
USB
S/PDIF Optical
LR
Audi o
Out
Composite Video
S/PDIF
Coaxial
HDMI
Scart
Di
g
ital E
ntertainer Elite EVA9 00 0
U.S . Patent Nos. 4,631,603; 4,819,098; 4,907,093; 5,315,448; and 6,516,132
S-Video
Component
SCART
S-Video
Stereo
S/PDIF
Ethernet port
coaxial
(audio)
HDMI
S/PDIF optical
USB
Power
video
(audio)
port
audio
with LEDs
Composite
video
On/off
switch
3. Connect the Digital Entertainer Elite power cord, and plug it into an outlet. Make sure
the on/off switch is set to on.
The LED on the front of the Digital Entertainer Elite lights up to show that it is
powered on.
4. Install the two AA batteries into the remote control that shipped with the product.
Setting Up the Digital Entertainer Elite
To set up the Digital Entertainer Elite:
1. Turn on the TV.
2. Set the video source selector on your TV to match the connection from your Digital
Entertainer Elite. For example, if you used HDMI, set the TV to use Digital HD or
HDMI input.
Note: If your TV has multiple inputs of a specific type (such as HDMI1 or HDMI2), make
sure that you have selected the correctly numbered input.
3. Check the TV display. If it is not clear, aim the remote control at the Digital
Entertainer Elite, and press TV Mode. You can cycle through the TV modes to get the
best display. It can take 3 or 4 seconds for each TV mode change.
4. As part of the initial setup, you are prompted to select a language.
5. When you hear the audio welcome message, press OK.
If you do not hear the audio welcome message, check the connections to the Digital
Entertainer Elite.
6. Select Basic Setup, and then set up the TV resolution.
7. Depending on where you bought your Digital Entertainer Elite, you might be
prompted to enter your zip code or to choose your country and nearest city.
If you want to receive news and weather, enter your zip code. Press the down arrow
when you are finished, and then press OK.
8. When prompted to install software, go to the computer where your media files are
stored.
Installing the NETGEAR Digital
Entertainer for Windows Software
After connecting the Digital Entertainer Elite and completing basic setup, follow these
steps to install the software:
1. Power on your computer, and log in as needed.
2. Insert the NETGEAR Resource CD into the CD drive on the computer.
The Welcome screen opens. If you do not see the Welcome screen, browse the files on
your CD, and then click Setup.
3. Select Install the NETGEAR Digital Entertainer for Windows software.
The Setup Wizard starts.
4. Follow the Setup Wizard steps to accept the licence and install the software.
5. After the Setup Wizard steps are finished, click Configure to use the Configuration
Wizard.