Quick Start Guide

| Industrial IoT

Item

Description

Aux antenna socket SMA female connector for auxiliary antenna (receive diversity).

Serial port

Female DE-9 port supporting 9-wire RS-232, RS-485 or RS-422

(software selectable).

GPS antenna socket SMA female connector for GPS antenna.

Main antenna socket SMA female connector for main antenna.

Reset button

Press and hold for less than 5 seconds to reboot to normal mode. The

LEDs are green and extinguish in sequence to indicate that the router

will reboot normally if the button is released during this period.

Press and hold for 5 to 15 seconds to reboot to recovery mode.

The LEDs are amber and extinguish in sequence to indicate that the

router will reboot to recovery mode if the button is released during

this period.

Press and hold for 15 to 20 seconds to reset the router to factory

default settings. The LEDs are red and extinguish in sequence to

indicate that the router will reset to factory default settings if the button

is released during this period.

SIM card tray slot The removeable tray houses the SIM card.

Micro USB 2.0 OTG

port

Provides connectivity for optional external storage or a USB Ethernet

dongle. Supplies up to 0.5A to connected device.

Six-way terminal

block connector

Connect power source, ignition and I/O wires here. Power, ignition

and I/O wires may be terminated on the supplied terminal block and

connected to a power source. Refer to the diagram and table under

Step 5 of the Installing your device section for correct wiring of the

terminal block. Operates in the 8-40V DC range.

RJ45 Fast Ethernet

port

Connect one or several devices via a network switch here.