Quick Start Guide

ITEM DESCRIPTION

5 Reset button • Press and hold for less than 5 seconds to reboot to normal mode. The

LEDs are green and extinguish in sequence to indicate that the router

will reboot normally if the button is released during this period.

• Press and hold for 5 to 15 seconds to reboot to recovery mode.

The LEDs are amber and extinguish in sequence to indicate that the

router will reboot to recovery mode if the button is released during

this period.

• Press and hold for 15 to 20 seconds to reset the router to factory

default settings. The LEDs are red and extinguish in sequence to

indicate that the router will reset to factory default settings if the

button is released during this period.

6 SIM card slot Insert SIM card here.

7 Micro USB 2.0 OTG port

Provides connectivity for optional external storage or a USB Ethernet

dongle. Supplies up to 0.5A to connected device.

8 Six-way terminal block

connector

Connect power source, ignition and I/O wires here. Power, ignition and I/O

wires may be terminated on the supplied terminal block and connected

to a power source. Refer to the diagram and table under Step 5 of the

Installing your device section for correct wiring of the terminal block.

Operates in the 8-40V DC range.

9 RJ45 Fast Ethernet port Connect one or several devices via a network switch here.

6 7 8