NetComm Liberty Series 3G Travel Router NetComm 3G Travel Router tl 3GT1Wn
ies 1 Hardware Installation 1. Gently insert the supplied battery into the battery compartment on the back of the 3G Router. 2. Connect the supplied power adapter to a wall power outlet and to the micro USB port of the 3G Router to charge the battery. The battery is fully charged when the Power LED lights up Solid Green. 3. Switch the 3G Router on and wait around 2 minutes to allow the device to power up.
2 Connecting your device You can use the 3G Router to create a Wireless Local Area Network (WLAN) to provide Internet access to wireless-enabled devices. Using the 3G Router with a 3G Mobile Broadband Internet Service • Connect a compatible 3G USB Modem to the 3G USB port of the 3G Router. • The 3G Router will automatically attempt to detect the connection details from the SIM card of your 3G USB modem. Simply wait for 2 minutes to allow the 3G Router to apply the settings.
• I f the 3G APN1 connection details were successfully detected, you will now be able to access the Internet.
3 Establishing Wireless Connection 3G Tower WiFi PDA Wi-Fi phone Laptop USB Modem 1. Using your wireless-enabled device, scan the wireless networks in your area and select the network called NetComm Wireless, then click connect. 2. Enter the following default security key: a1b2c3d4e5 Note: For optimal wireless security, we recommend that you change the default settings through the web interface. For more details, please consult the User Guide located on the supplied on the CD.
4 Establishing a WAN connection WiFi PDA Wi-Fi phone Laptop ADSL Modem Using the 3G Router with a fixed line Broadband Internet Service (DSL/Cable) • Connect your DSL or cable modem with the supplied Ethernet cable to the WAN/LAN port of your 3G Router. • On your computer open a web-browser (such as Internet Explorer, Firefox, or Safari) and type in 192.168.20.1 into the address bar. • At the login screen type admin into both the username and password fields. Then click submit.
n • Enter the relevant information in this screen as supplied by your ISP • Click on Apply to save the settings • Wait 2 minutes for the 3G Router to apply the settings • The Internet connection status can be determined by clicking on status from the menu after logging in to the 3G Router.
5 Establishing a LAN connection You can establish a LAN connection to your 3G Router using the WAN/LAN port by following these three basic steps. 1. With the device turned on, simply press the reset button on the side of the 3G Router quickly for less than 2 seconds and release. 2. With the supplied Ethernet cable, connect your computer to WAN/LAN port of the 3G Router. 3. Wait for 2 minutes to allow the 3G Router’s DHCP server to assign an IP address.
n 6 Charging your battery Charging your battery If you use the 3G Router until the battery has completely drained, it will power off. If this occurs, let the unit charge overnight. Note: T he battery must be fully charged before using your 3G Router for the first time. To charge your battery please complete the following steps: 1. With the battery inserted into your 3G Router connect the supplied power adapter to the wall power outlet and to the micro USB socket on the 3G Router. 2.
7 NetComm Velocity Series Accessories for your product NP902n NP901n NP910n NP900n NP910n Wireless N 150, this product is perfect for users wishing to extend their network with the convenience of a miniature USB Adapter NP900n Wireless N 150, this product is perfect for home users NP901n Wireless N 300, perfect for data intensive applications within a SoHo environment.