WELCOME TAGS user manual Netatmo doortag DTG01 Version 1 / February 2015
Contents What are the Netatmo WELCOME tags?................................................................................................. 3 How does it all work? .............................................................................................................................. 3 Configuration setup ................................................................................................................................. 4 Powering? ........................................................
What are the Netatmo WELCOME tags? You can add Welcome Tags to your Netatmo Welcome camera. They do not work separately and needs the Netatmo Welcome to operate. They allow you to monitor motion, vibration and let you know about opening and closing of your doors, windows, closets, mailboxes, sunroofs … How does it all work? Tag sends its measurements directly to the Welcome camera through long range radio communication.
Configuration setup To add Tag to the Welcome, follow the instructions on its quick start guide, or click on "Add Tags" in the settings menu. The app will guide you through the installation. Do not place tag before having set it up. 1) Bump the Tag 3 times on the top of WELCOME in order to put them in accessory pairing mode. WELCOME’s LED should turn on in a glowing green light. 2) Once the communication is established, the LED stays steady. The Tag’s LED lights up in a steady green too.
CAUTION: To ensure water resistance of the Tag, the seal must not be stuck between the Tag’s main part and the batteries’ cover. No data? Reason 1: Radio signal is too weak If the Tag is located too far away from your Welcome camera, or separated by solid obstacles such as concrete walls, the Tag might not be able to transmit data correctly. In that case, make sure to bring the Welcome closer to the place you wish to monitor with a Tag. Reason 2: Batteries are low Check the Tag’s batteries.
Technical specs SIZE 76x15.8x30.4 mm / 29.9x6.2x12 inches MECHANICS & DESIGN Single piece of high quality plastic. Indoor and outdoor: resistant to UV, rain and wind. Suits all door and window types. WIRELESS SPECIFICATIONS Radio connection between tags and Netatmo Welcome: long range (100m/330ft) - 915 MHz: US, Latin America, Australia, New Zealand, South Africa 783 MHz: Switzerland 921 MHz: Japan, Singapore 868 MHz: "Rest of the world" Bluetooth Low Energy for setup.
PACK CONTENT 3 Welcome Tags 3 strong adhesives strips 3x2 AAA batteries
FCC WARNING This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.