Learning Thermostat Installation Guide ™ 064-00011-ES_16_InstallGuideENGLISH.
WE TAKE YOUR PRIVACY SERIOUSLY We’re committed to being open and honest about how we use data. We’ll always ask for permission before sharing personally identifiable information like your email address, and we keep your data safe with industry standard security tools. To learn more about our Privacy Policy, go to nest.
Contents 1. Switch off power 2. Remove cover This protects you and avoids blowing a fuse in your equipment. Adjust the temperature on your old thermostat to make sure your system is off. Some covers pop off, while others need to be unscrewed. Breaker box Display Base Switch Screwdriver 3. Check your system 4. Remove any jumper wires If your old thermostat is labeled 120V or 240V or has thick wires with wire nuts, your system is high voltage. Not sure? Contact support.
Optional in most homes 5. Label wires Peel off the labels below and attach them to the thermostat’s matching wires. Use trim plate if needed You can cover up holes or marks left by your old thermostat with the optional trim plate. Use the white labels for any W3, E, HUM or DEHUM wires. The * connector can only connect to one of these wires. See two names for each connector on your old thermostat’s backplate? Visit nest.com/2labels for help.
8. Attach the Nest base 9. Connect wires 12. Setup and Nest Account Pull the wires through the center of the base, then attach it to the wall with the screws. After all the wires are securely connected, push them down to make sure they’re flush with the base. The Nest Thermostat will turn on and walk you through setup. Just turn the ring and press to select. During setup, you can connect the thermostat to Wi-Fi. Go to nest.com/account or download the Nest app to create a Nest Account.
Nest Labs, Inc. Limited Warranty Learning Thermostat™ For more information, visit nest.com You can also find answers in the Nest Community at nest.com/community For FCC Compliance Statement, visit nest.com/legal/fcc-compliance-notice THIS LIMITED WARRANTY CONTAINS IMPORTANT INFORMATION ABOUT YOUR RIGHTS AND OBLIGATIONS, AS WELL AS LIMITATIONS AND EXCLUSIONS THAT MAY APPLY TO YOU. 1. WHAT THIS LIMITED WARRANTY COVERS; PERIOD OF COVERAGE Nest Labs, Inc.
FCC Regulatory Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This Device may not cause harmful interference; and (2) this Device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules.
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Restrictions: (i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; (ii) the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall comply with the e.i.r.p.