ARB® UTILITY MANAGEMENT SYSTEMS™ WATER | ELECTRIC | GAS
Advantage II Users' Guide
Advantage II This document provides information about the Advantage II probe. Recharging Use charger supplied with this unit only. During daily use, recharge the unit overnight, every night. During periods of storage or non-use, do not charge the unit. Then 16 hours prior to the next use, recharge the unit. Use the “ON / OFF” button to turn ON, turn OFF, or RESET the unit. FCC Interference Statement This device complies with Part 15 of the FCC Rules.
Advantage II ISED Canada ICES-003 CAN ICES-3 (B) / NMB-3 (B). ISED Canada This device complies with Industry Canada's licence-exempt RSSs. Operation is subject to the following two conditions: 1. This device may not cause interference; and 2. This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.
Advantage II Review Reviews any readings stored. l Press ITEM to display the last reading captured. l Press ITEM again to see the next reading. l If the unit contains no readings, REVIEW remains on the screen. OR l Press MENU to go to the next menu option. Reading Error A Reading Error is usually caused by one of these situations: l End probe not aligned with remote pad. l No encoder is connected to remote pad. l Encoder is not connected properly to remote pad.